Sezione dedicata ai decoder Zgemma STAR H2 (combo tuner: sat e dtt)
  • Avatar utente
  • Avatar utente
  • Avatar utente
  • Avatar utente
@vannisca se leggi le istruzioni è tutto chiaro !! purtroppo i nuovi firmware sono più onerosi...e quando si va a creare il backup completo di tutti i plugins il backup stesso si corrompe, decretando l'impossibilità di installarlo sul modello H2.
Per questo motivo ho scelto la via alternativa , cioè firmware base + package settings. Si deve attendere 5secondi e dare "deny" se si aprono pagine e pop-up dopodichè in alto a destra compare link che ti dirige verso la pagina di download!! Saluti.
salve , quando provo ad eseguire il comando come da guida su Putty : 2) su telnet digitate il seguente comando
Codice: Seleziona tutto
opkg install --force-overwrite /tmp/*.ipk


il decoder mi chiede la password da root , quale sarebbe ? ho provato a lasciare il campo vuoto ma la pswd è errata
@vannisca ricapitoliamo...hai montato la image base e ti chiede la password ??? Strano...solitamente la image base è senza !! Sei certo di aver installato la image base presa da sito download openpli ??
ok ho risolto , ma è gia **** ***** o si procede in maniera manuale?

 Messaggio del moderatore SAT.technology STAFF

SOTTOPOSTO A MODERAZIONE PER FUORI regolamento !! RILEGGITELO !!!

Ciao @Nemoxyz,, spero saprai aiutarmi, ho eseguito tutto come da guida, dopo aver inviato il comando tramite putty, il ricevitore si riavvia correttamente, però dopo il boot, dopo qualche minuto schermata verde con errore, questo è quello che c'è dentro il file di log dell'errore, cosa posso fare? grazie mille
OpenPLi Enigma2 crash log
Codice: Seleziona tutto
crashdate=gio gen  1 01:02:49 1970
compiledate=Aug 24 2020
skin=SatTEK-StarWarsHDmod/skin.xml
sourcedate=2020-08-21
branch=release-7.3
rev=f2d419a
component=Enigma2

stbmodel=sh1
stbmodel=sh1
kernelcmdline=ubi.mtd=rootfs rootfstype=ubifs root=ubi0:rootfs bmem=256M@512M bmem=16M console=null
nimsockets=NIM Socket 0:
imageissue=***************************************************************


L8ÿvL8ÿvb/vmpeg/1/dst_appl

dmesg

<5>[    0.000000] Linux version 4.10.12 (oe-user@oe-host) (gcc version 6.3.0 (GCC) ) #1 Sun Jul 5 20:19:03 CEST 2020
<6>[    0.000000] Fetching vars from bootloader... found 7 vars.
<6>[    0.000000] Options: moca=0 sata=0 pcie=0 usb=1
<6>[    0.000000] Using 512 MB + 0 MB RAM (from CFE)
<6>[    0.000000] MEMC0 split: 256 MB -> Linux; 256 MB -> extra bmem
<6>[    0.000000] CPU0 revision is: 00029032 (Broadcom BMIPS3300)
<6>[    0.000000] Determined physical RAM map:
<6>[    0.000000]  memory: 10000000 @ 00000000 (usable)
<7>[    0.000000] bmem: adding 230 MB LINUX region at 9 MB (0x0e689000@0x00977000)
<6>[    0.000000] bmem: adding 16 MB RESERVED region at 240 MB (0x01000000@0x0f000000)
<4>[    0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 16 bytes.
<4>[    0.000000] Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
<6>[    0.000000] Zone ranges:
<6>[    0.000000]   Normal   [mem 0x0000000000000000-0x000000000fffffff]
<6>[    0.000000] Movable zone start for each node
<6>[    0.000000] Early memory node ranges
<6>[    0.000000]   node   0: [mem 0x0000000000000000-0x000000000fffffff]
<6>[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffffff]
<7>[    0.000000] On node 0 totalpages: 65536
<7>[    0.000000] free_area_init_node: node 0, pgdat 80902270, node_mem_map 81000020
<7>[    0.000000]   Normal zone: 576 pages used for memmap
<7>[    0.000000]   Normal zone: 0 pages reserved
<7>[    0.000000]   Normal zone: 65536 pages, LIFO batch:15
<7>[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
<7>[    0.000000] pcpu-alloc: [0] 0 
<6>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 64960
<5>[    0.000000] Kernel command line: ubi.mtd=rootfs rootfstype=ubifs root=ubi0:rootfs bmem=256M@512M bmem=16M console=null
<6>[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
<6>[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
<6>[    0.000000] Memory: 233520K/262144K available (7436K kernel code, 379K rwdata, 1472K rodata, 236K init, 153K bss, 28624K reserved, 0K cma-reserved)
<6>[    0.000000] NR_IRQS:160
<6>[    0.000000] Measuring MIPS counter frequency...
<6>[    0.000000] Detected MIPS clock frequency: 751 MHz (375.744 MHz counter)
<6>[    0.000000] clocksource: wktmr: mask: 0xffffffffffffffff max_cycles: 0x63a1e71a3, max_idle_ns: 440795203123 ns
<6>[    0.000000] sched_clock: 32 bits at 1kHz, resolution 1000000ns, wraps every 2147483647500000ns
<6>[    0.000000] Console: colour dummy device 80x25
<6>[    0.008000] Calibrating delay loop... 749.56 BogoMIPS (lpj=374784)
<6>[    0.008000] pid_max: default: 32768 minimum: 301
<6>[    0.008000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
<6>[    0.008000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
<6>[    0.012000] devtmpfs: initialized
<6>[    0.014000] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
<6>[    0.014000] futex hash table entries: 256 (order: -1, 3072 bytes)
<6>[    0.015000] bmem: adding extra 256 MB RESERVED region at 512 MB (0x10000000@0x20000000)
<6>[    0.015000] NET: Registered protocol family 16
<6>[    0.030000] USB0: power enable is active low; overcurrent is active low
<5>[    0.046000] SCSI subsystem initialized
<7>[    0.046000] libata version 3.00 loaded.
<6>[    0.047000] usbcore: registered new interface driver usbfs
<6>[    0.047000] usbcore: registered new interface driver hub
<6>[    0.047000] usbcore: registered new device driver usb
<6>[    0.047000] Linux cec interface: v0.10
<6>[    0.047000] Linux video capture interface: v2.00
<6>[    0.048000] Advanced Linux Sound Architecture Driver Initialized.
<6>[    0.049000] Bluetooth: Core ver 2.22
<6>[    0.049000] NET: Registered protocol family 31
<6>[    0.049000] Bluetooth: HCI device and connection manager initialized
<6>[    0.049000] Bluetooth: HCI socket layer initialized
<6>[    0.049000] Bluetooth: L2CAP socket layer initialized
<6>[    0.049000] Bluetooth: SCO socket layer initialized
<6>[    0.051000] clocksource: Switched to clocksource wktmr
<5>[    0.051000] FS-Cache: Loaded
<6>[    0.078000] NET: Registered protocol family 2
<6>[    0.080000] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
<6>[    0.080000] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
<6>[    0.080000] TCP: Hash tables configured (established 2048 bind 2048)
<6>[    0.080000] UDP hash table entries: 256 (order: 0, 4096 bytes)
<6>[    0.080000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
<6>[    0.081000] NET: Registered protocol family 1
<6>[    0.082000] RPC: Registered named UNIX socket transport module.
<6>[    0.082000] RPC: Registered udp transport module.
<6>[    0.082000] RPC: Registered tcp transport module.
<6>[    0.082000] RPC: Registered tcp NFSv4.1 backchannel transport module.
<6>[    0.085000] workingset: timestamp_bits=14 max_order=16 bucket_order=2
<5>[    0.087000] NFS: Registering the id_resolver key type
<5>[    0.087000] Key type id_resolver registered
<5>[    0.087000] Key type id_legacy registered
<6>[    0.087000] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
<6>[    0.088000] fuse init (API version 7.26)
<6>[    0.102000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
<6>[    0.102000] io scheduler noop registered
<6>[    0.102000] io scheduler cfq registered (default)
<6>[    0.103000] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
<6>[    0.105000] serial8250.0: ttyS0 at MMIO 0x10406800 (irq = 62, base_baud = 5062500) is a 16550A
<6>[    0.107000] serial8250.0: ttyS1 at MMIO 0x10406840 (irq = 63, base_baud = 5062500) is a 16550A
<6>[    0.108000] serial8250.0: ttyS2 at MMIO 0x10406880 (irq = 64, base_baud = 5062500) is a 16550A
<6>[    0.125000] loop: module loaded
<6>[    0.126000] brcmstb_nand: NAND controller driver is loaded
<6>[    0.127000] libphy: Fixed MDIO Bus: probed
<7>[    0.127000] __clk_enable: network [1]
<7>[    0.127000] __clk_enable: enet [1]
<7>[    0.127000] bcm7552_pm_genet_enable 00
<6>[    0.127000] bcmgenet bcmgenet.0: GENET 2.6 EPHY: 0x00a0
<4>[    0.127000] bcmgenet bcmgenet.0: failed to get enet-eee clock
<6>[    0.163000] libphy: bcmgenet MII bus: probed
<7>[    0.163000] __clk_disable: enet [0]
<7>[    0.163000] bcm7552_pm_genet_disable 00
<7>[    0.163000] __clk_disable: network [0]
<6>[    0.164000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<7>[    0.164000] __clk_enable: usb [1]
<7>[    0.164000] bcm7552_pm_usb_enable 00
<6>[    0.164000] ehci-brcm ehci-brcm.0: Broadcom STB EHCI
<6>[    0.164000] ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1
<6>[    0.175000] ehci-brcm ehci-brcm.0: irq 66, io mem 0x10480300
<6>[    0.182000] ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00
<6>[    0.183000] hub 1-0:1.0: USB hub found
<6>[    0.183000] hub 1-0:1.0: 2 ports detected
<6>[    0.185000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
<6>[    0.185000] ohci-brcm ohci-brcm.0: Broadcom STB OHCI
<6>[    0.185000] ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 2
<6>[    0.185000] ohci-brcm ohci-brcm.0: irq 67, io mem 0x10480400
<6>[    0.252000] hub 2-0:1.0: USB hub found
<6>[    0.252000] hub 2-0:1.0: 2 ports detected
<5>[    0.253000] random: fast init done
<6>[    0.254000] usbcore: registered new interface driver usb-storage
<6>[    0.254000] mousedev: PS/2 mouse device common for all mice
<6>[    0.255000] i2c /dev entries driver
<6>[    0.255000] usbcore: registered new interface driver btusb
<6>[    0.255000] sdhci: Secure Digital Host Controller Interface driver
<6>[    0.255000] sdhci: Copyright(c) Pierre Ossman
<6>[    0.255000] sdhci-pltfm: SDHCI platform and OF driver helper
<6>[    0.255000] hidraw: raw HID events driver (C) Jiri Kosina
<6>[    0.256000] usbcore: registered new interface driver usbhid
<6>[    0.256000] usbhid: USB HID core driver
<6>[    0.257000] NET: Registered protocol family 17
<6>[    0.258000] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
<6>[    0.258000] Bluetooth: HIDP socket layer initialized
<5>[    0.258000] Key type dns_resolver registered
<6>[    0.258000] PM: CP0 COUNT/COMPARE frequency depends on divisor
<6>[    0.261000] EBI CS2: setting up NAND flash (primary)
<6>[    0.262000] nand: device found, Manufacturer ID: 0x01, Chip ID: 0xda
<6>[    0.262000] nand: AMD/Spansion S34ML02G1
<6>[    0.262000] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
<6>[    0.262000] nand: device found, Manufacturer ID: 0x01, Chip ID: 0xda
<6>[    0.262000] nand: AMD/Spansion S34ML02G1
<6>[    0.262000] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
<6>[    0.262000] brcmnand brcmnand.0: 256MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, Hamming ECC
<6>[    0.263000] Bad block table found at page 131008, version 0x01
<6>[    0.263000] Bad block table found at page 130944, version 0x01
<5>[    0.266000] Creating 3 MTD partitions on "brcmnand.0":
<5>[    0.266000] 0x000000000000-0x000010000000 : "complete"
<5>[    0.269000] 0x000000000000-0x000000600000 : "kernel"
<5>[    0.272000] 0x000000600000-0x000010000000 : "rootfs"
<6>[    0.276000] EBI CS0: setting up SPI flash
<4>[    0.276000] brcm_setup_spi_flash: can't locate SPI master
<4>[    0.276000] brcm_setup_cs: can't register SPI flash (error -19)
<5>[    0.277000] ubi0: default fastmap pool size: 100
<5>[    0.277000] ubi0: default fastmap WL pool size: 50
<5>[    0.277000] ubi0: attaching mtd2
<5>[    0.491000] ubi0: attached by fastmap
<5>[    0.491000] ubi0: fastmap pool size: 100
<5>[    0.491000] ubi0: fastmap WL pool size: 50
<6>[    0.496000] usb 1-2: new high-speed USB device number 2 using ehci-brcm
<5>[    0.506000] ubi0: attached mtd2 (name "rootfs", size 250 MiB)
<5>[    0.506000] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
<5>[    0.506000] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
<5>[    0.506000] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
<5>[    0.506000] ubi0: good PEBs: 1996, bad PEBs: 4, corrupted PEBs: 0
<5>[    0.506000] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
<5>[    0.506000] ubi0: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 322033987
<5>[    0.506000] ubi0: available PEBs: 0, total reserved PEBs: 1996, PEBs reserved for bad PEB handling: 36
<6>[    0.506000] ALSA device list:
<6>[    0.506000]   No soundcards found.
<3>[    0.506000] Warning: unable to open an initial console.
<5>[    0.507000] ubi0: background thread "ubi_bgt0d" started, PID 66
<5>[    0.509000] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 67
<5>[    0.556000] UBIFS (ubi0:0): recovery needed
<6>[    0.618000] hub 1-2:1.0: USB hub found
<6>[    0.618000] hub 1-2:1.0: 4 ports detected
<5>[    0.740000] UBIFS (ubi0:0): recovery completed
<5>[    0.740000] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs"
<5>[    0.740000] UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
<5>[    0.740000] UBIFS (ubi0:0): FS size: 246714368 bytes (235 MiB, 1943 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
<5>[    0.740000] UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB)
<5>[    0.740000] UBIFS (ubi0:0): media format: w4/r0 (latest is w5/r0), UUID 12E1574D-302F-45E0-BAFE-F14405E5D19A, small LPT model
<6>[    0.741000] VFS: Mounted root (ubifs filesystem) on device 0:12.
<6>[    0.744000] devtmpfs: mounted
<6>[    0.745000] Freeing unused kernel memory: 236K
<4>[    0.745000] This architecture does not have kernel memory protection.
<6>[    0.897000] usb 1-2.4: new full-speed USB device number 3 using ehci-brcm
<4>[    2.145000] sh1_1: loading out-of-tree module taints kernel.
<6>[    2.148000] usbcore: registered new interface driver tpm
<5>[    3.855000] random: crng init done
<4>[    6.158000] sh1: module_layout: kernel tainted.
<4>[    6.158000] Disabling lock debugging due to kernel taint
<6>[    8.712000] Console: switching to colour frame buffer device 160x45
<6>[    8.884000] input: front panel as /devices/virtual/input/input0
<6>[    8.886000] input: dreambox remote control (native) as /devices/virtual/input/input1
<6>[    8.894000] input: dreambox advanced remote control (native) as /devices/virtual/input/input2
<6>[    9.004000] dvbdev: DVB: registering new adapter (dvb0)
<6>[    9.027000] platform dvb0.0: DVB: registering adapter 0 frontend 0 (DVB-S2)...
<6>[    9.029000] platform dvb0.0: DVB: registering adapter 0 frontend 1 (DVB-T/T2/C)...
<6>[    9.739000] input: front panel as /devices/virtual/input/input3
<6>[    9.772000] Registered IR keymap rc-cec
<6>[    9.773000] input: RC for hdmi_cec as /devices/platform/hdmi.0/rc/rc0/input4
<6>[    9.818000] rc rc0: RC for hdmi_cec as /devices/platform/hdmi.0/rc/rc0
<6>[   18.030000] Console: switching to colour dummy device 80x25
<7>[   21.293000] __clk_enable: network [1]
<7>[   21.293000] __clk_enable: enet [1]
<7>[   21.293000] bcm7552_pm_genet_enable 00
<6>[   21.386000] bcmgenet bcmgenet.0: configuring instance for (null)
<6>[   22.529000] bcmgenet bcmgenet.0 eth0: Link is Down
<6>[   23.195000] bcmgenet bcmgenet.0 eth0: Link is Up - 100Mbps/Full - flow control rx/tx
<6>[   24.719000] NET: Registered protocol family 10
<6>[   24.747000] Segment Routing with IPv6
<6>[   25.647000] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
@Brendy89 ciao, per prima cosa modificato il tuo messaggio chilometrico perchè non si poteva leggere in quel modo... :clown:
Purtroppo alcune skin con PLi 7 a salire hanno problemi !! Dovresti provare PLi 6.2 per questa STARWARS oppure usare la NOWeO che non ne da con 7.x !!
Dopo un primo approccio con il problema Non ho avuto modo e tempo di approfondire, ma di certo è dovuto ad un errore di chiama fra pannelli skin e sistema operativo.
Nemoxyz ha scritto: 3 anni

@Brendy89 ciao, per prima cosa modificato il tuo messaggio chilometrico perchè non si poteva leggere in quel modo... :clown:
Purtroppo alcune skin con PLi 7 a salire hanno problemi !! Dovresti provare PLi 6.2 per questa STARWARS oppure usare la NOWeO che non ne da con 7.x !!
Dopo un primo approccio con il problema Non ho avuto modo e tempo di approfondire, ma di certo è dovuto ad un errore di chiama fra pannelli skin e sistema operativo.

Si scusami, non sapevo come ridurlo... ad ogni modo, o notato che cambiando versione di openpli si blocca in modi differenti e con tempi diversi.... ciò vuol dire che è un po una lotteria se funziona o meno...? peccato
Con pli 6.2 vai sereno!! con pli 7.x sono cambiate molte cose ad ogni modo con Nowa eO dovresti non avere problemi l'hai provata ??
Con e tue versioni con pacchetto ipk di configurazione non c'era verso di farlo andare...Poi ho trovato un backup e funziona una meraviglia.
Con openpli 7 come dicevo ci sn problemi. Se trovo tempo vedrò di sistemare sebbene sia sempre poco :sick: il tempo stringe e le cose da badare tante :bored:
Buonasera, ho effettuato dei download di immagini più recenti per zgemma h2 star 2 e zgemma h2h, solo che quando vado ad estrarre i flie per metterli sulla chiavetta per l'installazione i file contenuti nelle cartelle scaricate risultano incompleti e non buoni per installare la nuova immagine. e' possibile fare un controllo?, Rimango in attesa di comunicazioni circa la risoluzione del problema. Grazie.
@elfo68
Salve, se si tratta di un package settings allora non sussiste alcun problema, dovresti leggere meglio le descrizioni per capire attentamente come si utilizza il file in download che risulta essere un pacchetto ipk, il cui uso ė abbondantemente descritto laddove si scarica, per questo motivo dedichiamo una bella scrittura in ogni nostro download.
Se invece si tratta di una image backup allora il problema risiede nel fatto che utilizzi un decompressore file rar obsoleto che rende illeggibile i files all'interno. Come scriviamo sempre in questi casi:

!!!AVVISO IMPORTANTE!!! "Errori Fake su File compressi"
Al fine di garantire un utilizzo corretto, evitando errori di "FILE DANNEGGIATO" dei nostri file compressi in WinRAR presenti in downloads ( problema non reale causato invece dai vostri sistemi PC datati!! ), risulta assolutamente necessario effettuare aggiornamento a versione WinRAR non inferiore a v6.1-6.2 ( last ver ) . La versione corretta ed aggiornata la potete trovare al seguente link : [url=https://www.keeplinks.org/p15/655bb93dba934]WINrar-download-versione-aggiornata[/url]
Se avete riscontrato questo errore è colpa del vostro "decompressore" datato per cui è necessario aggiornare il vostro WinRAR in uso oppure utilizzare 7zip come decompressore universale
Saluti.

@mastro7712 a mali estremi , estremi rimedi ! :[…]

@luc93 dopo che si presenta il problema per c[…]

Buonasera, grazie ho capito

AGGIORNAMENTO FEBBRAIO 2024: https://sat.technol[…]