IPKs vari per equipaggiare il vostro decoder : Skins , tools esterni per Decoder Enigma2
  • Avatar utente
  • Avatar utente
  • Avatar utente
  • Avatar utente
@Nemoxyz più ti leggo e più aumenta la mia stima per te. Sei davvero un grande! A parte la competenza, apprezzo tantissimo la gentilezza, l'umiltà, l'educazione, la pazienza e soprattutto la disponibilità a supportare l'utente in difficoltà. Il backup che hai fatto per il sunray minipro è qualcosa di impressionante. Non è che sono contento....di più...sono stupefatto. Ti confesso che lo zapping nello streaming è più veloce con questo cartorcio del secolo scorso che con i recentissimi Zgemma H5. Intendo che con questa carretta premo e dopo un quarto di secondo (dico un quarto) partono audio e video sostanzialmente insieme. Con l'h5 (ho provato con diverse immagini e non cambia nulla) cambio canale, parte la voce, mi vado a fare un caffè e dopo averlo bevuto si muovono le immagini (possono passare anche 10 secondi a canale). Complimenti vivissimi dunque per il gran lavoro che hai fatto per velocizzare questo dispositivo. I VOD li ho provati ancora senza plugin e devo dire che partono un po stentando ma poi continuano normalmente (ancora un titolo intero non l'ho complettato però). Ci si può accontentare benissimo. Per quello chemi hai raccontato, penso che alla fine non mi rimmarrà altro da fare che usare la tua versione moddata di xc. Sperando tu abbia messo pure la funzione per scricare i file nell'hard disk o usb. Grazie ancora.
@Lucesat sei troppo buono !!! Io faccio quello che posso e che sta nelle mie competenze!! Ci studio su appena posso e cerco di darvi il meglio!! Sicuramente posso dirti che Lululla è una spanna sopra in quanto a plugin e loro sviluppo per cui non c'è storia !! Se c'è da ringraziare qlcuno sul vod player è lui !! ;-)
Cmq apprezzo i complimenti per il backup e ti ringrazio ancora. No purtroppo il vod player da me moddato non ha nessuna funzione particolare solo la semplice play , stop avanti ed indietro , no trame , niente figure,nessuno download offline, è tutto carino esteticamente ho cercato di compensare in qst ma molto semplice molto più scarno di jk multi !!! Ed ho detto tutto !! puoi solo montare più liste ( tipo 2 liste diverse ) ma oltre qst non hai nessuna altra feature. Mi dispiace, il mio concetto è minimalista ed essenziale per andare al cuore della velocità!!! Saluti.
Per @lululla
Grazie mille.
Codice: Seleziona tutto
<?xml version="1.0" encoding="utf-8"?>
<openATV>
	<enigma2>
		<crashdate>Lun Set 24 02:44:15 2018</crashdate>
		<compiledate>Jul 21 2014</compiledate>
		<contactemail>forum at www.opena.tv</contactemail>
		<!-- Please email this crashlog to above address -->
		<skin>MetrixHD/skin.MySkin.xml</skin>
		<sourcedate>2014-07-21</sourcedate>
		<version>3.0.0</version>
	</enigma2>
	<image>
		<stbmodel>solo</stbmodel>
		<kernelversion>
			<!-- Cannot allocate memory -->
		</kernelversion>
		<kernelcmdline>bmem=144M ubi.mtd=0 root=ubi0:rootfs rootfstype=ubifs rw console=ttyS0,115200n8 rootflags=sync</kernelcmdline>
		<nimsockets>NIM Socket 0:</nimsockets>
		<imageversion>
			<![CDATA[
box_type=vusolo
build_type=0
version=4.1
build=0
date=20140713015629
comment=openATV
target=9
creator=openATV
url=http://www.opena.tv
catalog=http://www.opena.tv
]]>
		</imageversion>
		<imageissue>
			<![CDATA[

***************************************************************
#                                                             #
#        SAT.TECHNOLOGY optimized openATV mod backups         #
#        Vu SOLO Series ( SoloPRO-MiniSolo-Cloudibox )        #
#                                                             #
***************************************************************
     SINGLEtuner SAT + DTT usb ready drivers for OE 2.0
   support on https://sat.technology/viewforum.php?f=140
			   
Operating System : %s %r
Kernel Compiled date: %v
Hardware Type : %m
Homepage blog/forum/website : https://sat.technology

---------------------------------------------------------------


]]>
		</imageissue>
	</image>
	<software>
		<enigma2software>
			<!-- Cannot allocate memory -->
		</enigma2software>
		<vuplussoftware>
			<!-- Cannot allocate memory -->
		</vuplussoftware>
		<gstreamersoftware>
			<!-- Cannot allocate memory -->
		</gstreamersoftware>
	</software>
	<crashlogs>
		<enigma2crashlog>
			<![CDATA[
fonts/Roboto-BlackItalic.ttf...OK (Boldit)
[FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Subtitlefont)
[FONT] adding font /usr/share/fonts/lcd.ttf...OK (LCD)
[FONT] adding font /usr/share/fonts/ae_AlMateen.ttf...OK (Replacement)
[FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console)
[SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00_templates.xml
[SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00a_InfoBar.MySkin.xml
[SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00b_SecondInfoBar.MySkin.xml
[SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00c_SecondInfoBarECM.xml
[SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00d_InfoBarLite.xml
[SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00e_ChannelSelection.MySkin.xml
[SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00f_MoviePlayer.MySkin.xml
[SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00g_EMC.MySkin.xml
[SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_01_openatv.xml
[SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_02_display.xml
[SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_03_plugins.xml
[SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_04_check.xml
[SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_05_screens_unchecked.xml
[FONT] adding font /usr/share/fonts/lcd.ttf...OK (LCD)
[FONT] adding font /usr/share/fonts/ae_AlMateen.ttf...OK (Replacement)
[FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console)
[FONT] adding font /usr/share/fonts/andale.ttf...OK (Fixed)
[FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Arial)
[FONT] adding font /usr/share/enigma2/MetrixHD/fonts/OpenSans-Regular.ttf...OK (Regular)
[FONT] adding font /usr/share/enigma2/MetrixHD/fonts/OpenSans-Regular.ttf...OK (RegularLight)
[FONT] adding font /usr/share/enigma2/MetrixHD/fonts/setrixHD.ttf...OK (SetrixHD)
[FONT] adding font /usr/share/enigma2/MetrixHD/fonts/meteocons.ttf...OK (Meteo)
[FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Subs)
[FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (FdLcD)
[iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device >
[iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device >
Activating keymap: Default (US)
Activating language Italiano
[VideoMode] setting aspect: 16:9
[VideoMode] setting wss: auto
[VideoMode] setting policy: bestfit
[VideoMode] setting policy2: letterbox
cannot open /proc/stb/avs/0/input_choices
[VideoMode] setting scaler_sharpness to: 0000000D
[VideoMode] setMode - port: HDMI, mode: 1080i, rate: 50Hz
[EPGC Loads] Poller enabled.
[EPGC Save] Poller enabled.
[EPGC] setCacheFile read/write epg data from/to '/media/hdd/epg.dat'
[EPGC] time updated.. start EPG Mainloop
Setting OSD position: 12 698 8 560
Setting OSD alpha: 255
Setting 3D mode: auto
Setting 3D depth: 50
[EPGC Save] Poller enabled.
[EPGC Loads] Poller enabled.
FIXME: request for unknown slot
FIXME: request for unknown slot
[EPGImport] fallback to default translation for  Automated SATtek EPG Importer
[EPGImport] fallback to default translation for  SATtek-EPG-Importer-v1
[EPGImport] fallback to default translation for  SATtek-EPG-Importer-v1
[Ipkg] Added to OPKG destinations: /
[Info-Panel] machinebrand: Vu+
[Info-Panel] machinename: Solo
[Info-Panel] oem name: vuplus
[Info-Panel] boxtype: vusolo
[EPGC] 79891 events read from /media/hdd/epg.dat
Plugin  Extensions/WebInterface failed to load: No module named plugin
No 'mechanize' module
No module named servicewebts
ERROR servicewebts
[iSettingE2] set language to  it
[iSettingE2] set language to  it
iSettingE2 Architecture: MIPSEL
[FONT] adding font /usr/lib/enigma2/python/Plugins/Extensions/iSettingE2/Fonts/Roboto-Regular.ttf...OK (RegularIE2)
--> setting contrast to: 00008000
--> setting saturation to: 00008000
--> setting hue to: 00008000
--> setting brightness to: 00008000
--> setting block_noise_reduction to: 00000000
--> setting mosquito_noise_reduction to: 00000000
--> setting digital_contour_removal to: 00000000
--> setting splitmode to: off
--> setting sharpness to: 00000000
--> setting auto_flesh to: 00000000
--> setting green_boost to: 00000000
--> setting blue_boost to: 00000000
--> setting dynamic_contrast to: 00000000
--> setting color_soace to: Edid(Auto)
--> applying pep values
[EPGImport] autostart (0) occured at 1537749819.17
[BWMON] no autostart
[AutoTimer] Auto Poll Enabled
[CI_Assignment] activating ci configs:
[CI_Activate] FOUND 2 CI Slots 
[CI_Activate_Config_CI0] no config file found
[CI_Activate_Config_CI0] error parsing xml...
[CI_Activate_Config_CI1] no config file found
[CI_Activate_Config_CI1] error parsing xml...
starting hotplug handler
==================================================================================
[NAVIGATION] getNextRecordingTime= -1
[NAVIGATION] nextRecordTimerAfterEventActionAuto= False
[NAVIGATION] current Time=1537749819.36
[NAVIGATION] timediff=1537749820.36
==================================================================================
[NAVIGATION] getNextPowerManagerTime= -1
[NAVIGATION] nextPowerManagerAfterEventActionAuto= False
[NAVIGATION] current Time=1537749819.36
[NAVIGATION] timediff=1537749820.36
==================================================================================
[NAVIGATION] wasTimerWakeup = False
Setvolume: 100 100 (raw)
Setvolume: 0 0 (-1db)
[BWMON] no autostart
EMC: +++ EMC V3.7.4beta20131015 startup
iSettingE2 Plugin - Size Screen is: HDR (1280 x 720)
[SKIN] Parsing embedded skin <embedded-in-'MessageAds'>
[AutoBouquetsMaker] AutoStart Enabled
[AutoBouquetsMaker] AutoBouquetsMaker Schedule Disabled at Lun 24 Set 2018 02:43:39 CEST
[EPGImport] autostart (0) occured at 1537749819.82
[EPGImport] WakeUpTime now set to 1537756235 (now=1537749819)
[(100, <class 'Screens.InfoBar.InfoBar'>)]
MetrixHDWeatherStandalone lookup for ID 718268
warning, skin is missing element epg_description in <class 'Screens.InfoBarGenerics.SecondInfoBar'>
warning, skin is missing element channel in <class 'Screens.InfoBarGenerics.SecondInfoBar'>
[Skin] Attribute not implemented: valign value: center
[SCREENNAME]  RdsInfoDisplaySummary
warning, skin is missing element From in <class 'Screens.Dish.Dish'>
warning, skin is missing element Goto in <class 'Screens.Dish.Dish'>
warning, skin is missing element tunerName in <class 'Screens.Dish.Dish'>
warning, skin is missing element turnSpeed in <class 'Screens.Dish.Dish'>
warning, skin is missing element posGoto in <class 'Screens.Dish.Dish'>
warning, skin is missing element posFrom in <class 'Screens.Dish.Dish'>
warning, skin is missing element turnTime in <class 'Screens.Dish.Dish'>
warning, skin is missing element Tuner in <class 'Screens.Dish.Dish'>
warning, skin is missing element PTSSeekPointer in <class 'Screens.PVRState.TimeshiftState'>
warning, skin is missing element statusicon in <class 'Screens.PVRState.TimeshiftState'>
warning, skin is missing element eventname in <class 'Screens.PVRState.TimeshiftState'>
warning, skin is missing element PTSSeekBack in <class 'Screens.PVRState.TimeshiftState'>
warning, skin is missing element speed in <class 'Screens.PVRState.TimeshiftState'>
RemovePopup, id = ZapError
MetrixHDWeatherStandalone lookup for ID 718268
[SCREENNAME]  RdsInfoDisplay
[SCREENNAME]  InfoBarSummary
[SCREENNAME]  InfoBar
setValue 50
Setvolume: 50 50 (raw)
Setvolume: 32 32 (-1db)
lastshutdown=True		(True = last shutdown was OK)
NOK shutdown action=normal
bootup action=normal
[LogManager] Trim Poll Started
[LogManager] Trash Poll Started
[LogManager] probing folders
[LogManager] found following log's: ['/home/root/logs']
[LogManager] looking in: /home/root/logs
[LogManager] /home/root/logs: bytesToRemove -10432235
[NTP]: setting E2 time: 1537749831.05
EMC: Setting EPG language: it_IT
[CAMSTARTER] Start/Check: 1
[CAMSTARTER] no CAM active, starting /usr/bin/***a*_2.3.0 -t -C /usr/keys/***a*.cfg
playing 1:0:1:D49:1450:13E:820000:0:0:0:
[SCREENNAME]  InfoBar
setPixmapNum(0) failed! defined pixmaps: []
setPixmapNum(0) failed! defined pixmaps: []
setPixmapNum(0) failed! defined pixmaps: []
RemovePopup, id = ZapError
allocate channel.. 1450:013e
opening frontend 0
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 1 Freq 11766000 Pol 1 SR 29900000 INV 2 FEC 3 orbpos 130 system 1 modulation 2 pilot 2, rolloff 0
tuning to 1166 mhz
OURSTATE: tuning
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:D49:1450:13E:820000:0:0:0:
allocate demux
[VLC] Checking for buildin servicets ...  no
[VLC] Checking for existing and usable servicets.so ...  No module named servicets
[VLC] Checking for usable gstreamer service ...  yes
EMC: Next trashcan cleanup in 1337 minutes
poll: unhandled POLLERR/HUP/NVAL for fd 37(16)
poll: unhandled POLLERR/HUP/NVAL for fd 42(16)
poll: unhandled POLLERR/HUP/NVAL for fd 45(16)
job Components.Task.Job name=LogManager #tasks=1 completed with [] in None
[EPGC] Saving EPGCache.
[EPGC] store epg to realpath '/media/hdd/epg.dat'
[EPGC] 79887 events written to /media/hdd/epg.dat
[SEC] set static current limiting
0.0.0.0
192.168
ER plugin not found
[OpenWebif] no plugins to load
[OpenWebif] started on 80
[OpenWebif] started on 443
poll: unhandled POLLERR/HUP/NVAL for fd 38(16)
job Components.Task.Job name=EPG Cache Check #tasks=2 completed with [] in None
[EPGC] Refreshing EPGCache.
main thread is non-idle! display spinner!
[EPGC] 79887 events read from /media/hdd/epg.dat
set sequence pos 3
EMC: [EMCMS] trashcan cleanup: no trashcan...
job Components.Task.Job name=EPG Cache Check #tasks=2 completed with [] in None
set sequence pos 4
[SEC] setVoltage 1
[SEC] sleep 200ms
[SEC] invalidate current switch params
[SEC] sendDiseqc: e00000(DiSEqC reset)
[SEC] sleep 50ms
[SEC] sendDiseqc: e00003(DiSEqC peripherial power on)
[SEC] sleep 150ms
[SEC] sendDiseqc: e01038f1(?)
[SEC] sleep 100ms
set sequence pos 3
[SEC] setTone 1
[SEC] sleep 10ms
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion on, m_tuning 1
[SEC] sleep 500ms
(0)fe event: status 1f, inversion on, m_tuning 2
OURSTATE: ok
[eDVBLocalTimerHandler] channel 0x2672058 running
[eEPGCache] channel 0x2672058 running
[EPGC] next update in 2 sec
stop release channel timer
ok ... now we start!!
eventNewProgramInfo 0 0
have 1 video stream(s) (01f5), and 1 audio stream(s) (0259), and the pcr pid is 01f5, and the text pid is 0237
allocate demux
decoder state: play, vpid=501, apid=601
DMX_SET_PES_FILTER(0x1f5) - pcr - ok
DEMUX_START - pcr - ok
DMX_SET_PES_FILTER(0x259) - audio - ok
DEMUX_START - audio - ok
AUDIO_SET_BYPASS(1) - ok
AUDIO_PAUSE - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 1 - ok
DMX_SET_PES_FILTER(0x1f5) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
DMX_SET_PES_FILTER(0x237) - ttx - ok
DEMUX_START - ttx - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
AUDIO_CHANNEL_SELECT(0) - ok
disable teletext subtitles page ffffffffffffffff (und)
setPixmapNum(0) failed! defined pixmaps: []
setPixmapNum(0) failed! defined pixmaps: []
[Volume Adjust] Update Info
[Volume Adjust] Volume = 50
[Volume Adjust] load xml...
[Volume Adjust] New Channel
[Volume Adjust] oldvol = 0
[eDVBCAService] new service 1:0:1:D49:1450:13E:820000:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:1:D49:1450:13E:820000:0:0:0:
RemovePopup, id = ZapError
[SEC] set dynamic current limiting
1 8b 1
KEY: 139 KEY_MENU MENU 2018-09-24 02:44:01.145294
action ->  InfobarMenuActions mainMenu
[SCREENNAME]  MenuSummary
[SCREENNAME]  ['menu_mainmenu', 'Menu']
0 8b 1
KEY: 139 KEY_MENU MENU 2018-09-24 02:44:02.161179
VIDEO_GET_EVENT - ok
[EPGC] start caching events(1537749842)
ERROR reading PES (fd=65) - Value too large for defined data type
PATready
use pmtpid 044d for service_id 0d49
[CAMSTARTER] Start/Check: 2
[CAMSTARTER] no CAM active, starting /usr/bin/***a*_2.3.0 -t -C /usr/keys/***a*.cfg
[Dish] tuning failed
eventNewProgramInfo 0 0
have 1 video stream(s) (01f5), and 3 audio stream(s) (0259, 0263, 026d), and the pcr pid is 01f5, and the text pid is 0237
decoder state: play, vpid=501, apid=601
[Volume Adjust] Update Info
[Volume Adjust] Volume = 50
[Volume Adjust] load xml...
[eDVBCIInterfaces] gotPMT
[VideoMode] setting aspect: 16:9
[VideoMode] setting wss: auto
[VideoMode] setting policy: bestfit
[VideoMode] setting policy2: letterbox
1 6c 1
KEY: 108 KEY_DOWN DOWN 2018-09-24 02:44:05.759521
0 6c 1
KEY: 108 KEY_DOWN DOWN 2018-09-24 02:44:06.329349
1 6c 1
KEY: 108 KEY_DOWN DOWN 2018-09-24 02:44:06.344074
0 6c 1
KEY: 108 KEY_DOWN DOWN 2018-09-24 02:44:07.009231
1 6c 1
KEY: 108 KEY_DOWN DOWN 2018-09-24 02:44:07.079094
0 6c 1
KEY: 108 KEY_DOWN DOWN 2018-09-24 02:44:07.477570
ERROR reading PES (fd=65) - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 65(8)
AITready
sdt update done!
poll: unhandled POLLERR/HUP/NVAL for fd 76(16)
1 6c 1
KEY: 108 KEY_DOWN DOWN 2018-09-24 02:44:08.500554
0 6c 1
KEY: 108 KEY_DOWN DOWN 2018-09-24 02:44:08.572091
[eDVBLocalTimerHandler] diff is -2
[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
[eDVBLocalTimerHandler] set RTC Time
[eDVBLocalTimerHandler] update RTC
[eDVBLocalTimerHandler] time update to 02:44:06
[eDVBLocalTimerHandler] m_time_difference is -2
[eDVBLocalTimerHandler] set Linux Time
[Volume Adjust] Update Info
[Volume Adjust] Volume = 50
[Volume Adjust] load xml...
[Volume Adjust] Update Info
[Volume Adjust] Volume = 50
[Volume Adjust] load xml...
[EPGC] abort non avail netmed schedule reading
[EPGC] abort non avail netmed schedule other reading
[EPGC] abort non avail FreeSat schedule_other reading
[EPGC] abort non avail viasat reading
[Volume Adjust] Update Info
[Volume Adjust] Volume = 50
[Volume Adjust] load xml...
[Volume Adjust] Update Info
[Volume Adjust] Volume = 50
[Volume Adjust] load xml...
1 67 1
KEY: 103 KEY_UP UP 2018-09-24 02:44:07.959791
0 67 1
KEY: 103 KEY_UP UP 2018-09-24 02:44:08.191453
1 67 1
KEY: 103 KEY_UP UP 2018-09-24 02:44:08.874461
0 67 1
KEY: 103 KEY_UP UP 2018-09-24 02:44:09.108129
1 67 1
KEY: 103 KEY_UP UP 2018-09-24 02:44:09.463358
0 67 1
KEY: 103 KEY_UP UP 2018-09-24 02:44:09.694403
1 160 1
KEY: 352 KEY_OK OK 2018-09-24 02:44:10.012490
action ->  OkCancelActions ok
++++++++++ERROR READ CONFIG+++++++++++++
iptv_streamse instance has no attribute '__getitem__'
!!!!!!!!-------------------- URL http://exampleserver.com:8888/enigma2.php
ERROR IPTV_LIST_LEN = 0
[SKIN] Parsing embedded skin <embedded-in-'xc_Main'>
accel alloc failed

ERROR: accelAlloc failed
main thread is non-idle! display spinner!
Traceback (most recent call last):
  File "/usr/lib/enigma2/python/Components/ActionMap.py", line 68, in action
  File "/usr/lib/enigma2/python/Components/ActionMap.py", line 48, in action
  File "/usr/lib/enigma2/python/Screens/Menu.py", line 54, in okbuttonClick
  File "/usr/lib/enigma2/python/Tools/BoundFunction.py", line 9, in __call__
  File "/usr/lib/enigma2/python/Plugins/Extensions/XCplugin/plugin.py", line 3514, in Start_iptv_player
    session.openWithCallback(check_configuring, xc_Main)
  File "/usr/lib/enigma2/python/mytest.py", line 327, in openWithCallback
    dlg = self.open(screen, *arguments, **kwargs)
  File "/usr/lib/enigma2/python/mytest.py", line 337, in open
    dlg = self.current_dialog = self.instantiateDialog(screen, *arguments, **kwargs)
  File "/usr/lib/enigma2/python/mytest.py", line 260, in instantiateDialog
    return self.doInstantiateDialog(screen, arguments, kwargs, self.desktop)
  File "/usr/lib/enigma2/python/mytest.py", line 303, in doInstantiateDialog
    dlg.applySkin()
  File "/usr/lib/enigma2/python/Components/GUISkin.py", line 114, in applySkin
  File "/usr/lib/enigma2/python/Components/GUISkin.py", line 30, in createGUIScreen
  File "/usr/lib/enigma2/python/Components/GUIComponent.py", line 39, in applySkin
  File "/usr/lib/enigma2/python/skin.py", line 451, in applyAllAttributes
  File "/usr/lib/enigma2/python/skin.py", line 298, in applyAll
TypeError: 'tuple' object is not callable
(PyObject_CallObject(<bound method NumberActionMap.action of <Components.ActionMap.NumberActionMap instance at 0x2759b70>>,('OkCancelActions', 'ok')) failed)
]]>
		</enigma2crashlog>
	</crashlogs>
</openATV>
Se non editi il file .xml con i dati giusti e lo rinomini avrai sempre crash
Inutile premere ok se non vedi nulla a video. Se la lista non compare e peemi ok da nulla e crasha
Poi vi sono una miriade di errori ma ripeto roba vecchia e lascia il tempo che trova : l’admin è stato molto esaustivo e preciso oltre che competente
Penso di aver inserito le credenziali giuste, ma può anche essere che abbia sbagliato qualcosa. Il crash si verifica quando provo ad entrare nel plugin sia cambiando il nome al file, sia senza cambiarlo scrivendo le credenziali. Tanto che avevo pensato di lasciare il nome originale al file e poi mettere le credenziali a video direttamente col telecomando (cosa che mi ha funzinato con H5 + Egami, sempre per la 5.9). Comunque sia, più tardi rifarò tutte le prove. Magari era la stanchezza della notte a farmi sbagliare. Grazie sempre
Aggiornamento. Sarò imbranato io non lo so, ma niente da fare, sempre crash Ho reinstallato la 5.9. Da vergine senza credenziali e nome di defaul va in crash; con credenziali e nome cambiato va in crash, metto credenziali e nome di default e va in crash. Praticamente ho provato tutte le combinazioni senza successo. Non è che sia la prima volta che metto questo plugin in h5 ,SE, H2H e via dicendo. Metto le credenziali al STVOD e funziona. Ora provo xc lite. In attesa di una soluzione provo a vedere come va.
@Lucesat io te l'ho già detto....non va su questa release !!!! Non so quali altre parole usare. :-o :-/
Il kernel è vecchio ok ?? ci siamo su questo punto ? XCplugin di lululla è super !! usa librerie moderne !! Non ce la farà mai ad andare su questo modello....non so se devo essere più chiaro e sintetico : non lo fare non andrà mai !!! Sono stato sufficientemente cristallino ?? Se l'ho detto all'inizio....è perchè ho già provato...in passato e crashava anche a me ma è normalissimo...
Tu fai un paragone con archietture mips32el che non ha alcun senso...certo ceh con H5 ed images moderne ed aggiornata va....ovvio !! Scopriamo l'acqua calda ? :-D
Te lo ripeto...accontentati....e goditelo il vu solo pro !! Saluti.
Ci rinuncio...anche la lite va in crash.

Ha scritto dopo 4 minuti 16 secondi:
Nemoxyz ha scritto: 5 anni @Lucesat io te l'ho già detto....non va su questa release !!!! Non so quali altre parole usare. :-o :-/
Il kernel è vecchio ok ?? ci siamo su questo punto ? XCplugin di lululla è super !! usa librerie moderne !! Non ce la farà mai ad andare su questo modello....non so se devo essere più chiaro e sintetico : non lo fare non andrà mai !!! Sono stato sufficientemente cristallino ?? Se l'ho detto all'inizio....è perchè ho già provato...in passato e crashava anche a me ma è normalissimo...
Tu fai un paragone con archietture mips32el che non ha alcun senso...certo ceh con H5 ed images moderne ed aggiornata va....ovvio !! Scopriamo l'acqua calda ? :-D
Te lo ripeto...accontentati....e goditelo il vu solo pro !! Saluti.
Ok. Ho letto solo ora. E' che sono testardo e prima di arrendermi le provo tutte. @lululla pensavo mi stesse dando delle speranze con quei consigli. Avesssi letto prima questo le tue ultime parole mi sarei arreso prima.

Ultima cosa per il Minipro e poi ci levo mano che sono due giorni che ci smaetto sopra: clearmem lo posso mettere? Come mai non lo hai messo tu? Non va nemmeno questo? Per il telecomando...se premo il tasto rosso voglio che vada subito in stand by ed adesso com'è impostato mi porpone le quattro scelte. Come correggo a mio piacere?

Ha scritto dopo 24 minuti 43 secondi:
Chi l'ha dura la vince. Ora ho XC Plugin funzionante con copertine e trama (downoload file no). MI sono giocato l'ultima carta mettendo la primissima versione del plugin. Non riesco a leggere da nessuna parte quale sia. Non va nulla in crsh e VOD partono (con difficoltà iniziale) ma poi perdurano. Se vuoi te passo. Ho dovuto togliere la tua versione di satVOD perchè quando premevo su XC pluigin si apriva il tuo invece che lui.
Lo puoi mettere clearmem ma non credere che sia la "panacea" sperata !! pulisce la ram ma anche parecchi thread attivi che molte volte sono utili al box !! 100mb quelli sono non puoi pretendere che cn il 300mhz dia potenza...il discorso gira gira torna lì !! non l'ho messo per non occupare spazio se lo vuoi usare se libero di farlo.
Hai messo una versione forse parallela a quella che ho usato io "moddandola" e rimuovendo le features di cui parli che a mio avviso rallentano parecchio!!! Eh si certo la devi rimuovere. ok hai fatto bene , non non c'è bisogno che me la passi basta che indichi la versione Xcplugin come informazione. Nei backup nostri metto sempre la mia mod perchè è snella chi vuole altro come te si mette autonomamente la versione che desidera , magari omaggiando sul sito anche l'autore Lululla i cui sforzi vanno premiati. Saluti.
  • 1
  • 38
  • 39
  • 40
  • 41
  • 42
  • 75

@luc93 buongiorno, onestamente non ho Idea di[…]

Buonasera, grazie ho capito

AGGIORNAMENTO FEBBRAIO 2024: https://sat.technol[…]

AGGIORNAMENTO FEBBRAIO 2024: https://sat.techno[…]