IPKs vari per equipaggiare il vostro decoder : Skins , tools esterni per Decoder Enigma2
  • Avatar utente
  • Avatar utente
  • Avatar utente
  • Avatar utente
  • Avatar utente
seguita tutta la procedura per l'installazione di xc plugin dopo aver installato e abilitato flash expander. configurato il file in etc/enigma/xc , ma appena provo ad avviare il plugin va in crash il decoder. Non so più cosa fare per far funzionare sto benedetto plugin, sto sbattendo sa 4 giorni!!!!!!!! alllego crash log:

Codice: Seleziona tutto
OpenPLi Enigma2 crash log

crashdate=ven mag 15 19:27:37 2020
compiledate=Jun 27 2016
skin=Nowa-E-OrangeMOD/skin.xml
sourcedate=2016-06-27
branch=(HEAD detached at 4bf2f1e)
rev=4bf2f1e
component=Enigma2

stbmodel=dm800se
kernelcmdline=root=/dev/mtdblock3 rootfstype=jffs2 rw console=ttyS0,115200 bmem=116M@140M
nimsockets=NIM Socket 0:
imageissue=***************************************************************


<   565.850> [eDVBTextEncodingHandler] encoding.conf: couldn't parse 

<   565.850> [eDVBTextEncodingHandler] encoding.conf: couldn't parse 

<   565.850> [eDVBTextEncodingHandler] encoding.conf: couldn't parse 

<   565.851> [eDVBTextEncodingHandler] encoding.conf: couldn't parse 

<   568.691> [HardwareInfo] Scanning hardware info
<   568.695> Detected: dm800se
<   568.722> [Harddisk] enumerating block devices...
<   568.875> [Harddisk] new device sda -> /dev/sda -> /dev/sda
<   568.877> [ePopen] command: ('hdparm', 'hdparm', '-S0', '/dev/sda')
<   568.969> [Harddisk] new device sdb -> /dev/sdb -> /dev/sdb
<   569.995> [NimManager] Reading satellites.xml
<   570.046> [NimManager] Reading cables.xml
<   570.048> [NimManager] Reading terrestrial.xml
<   570.198> [SecConfigure] sec config cleared
<   570.202> [SecConfigure] slot: 0 configmode: simple
<   570.203> [SecConfigure] diseqcmode:  diseqc_a_b
<   570.208> [SecConfigure] sec config completed
<   571.825> [ML] BlurayPlayer not installed: cannot import name BlurayPlayer
<   578.841> Unknown device type: SMS IR (Hauppauge WinTV MiniStick)
<   578.889> Unknown device type: dreambox front panel
<   579.054> Activating keymap: Default (US)
<   579.055> [ePopen] command: loadkmap < /usr/share/keymaps/default.kmap
<   579.060> Activating language Italiano
<   579.958> --> setting scaler_sharpness to: 0000000E
<   580.471> [keymapparser] keymap file /usr/share/enigma2/keytranslation.xml not found
<   580.508> [ePopen] command: ip -o addr show dev eth0
<   580.511> [ePopen] command: ip -o addr show dev wlan0
<   580.704> [SoftcamSetup] fallback to default translation for Green key
<   580.711> [SoftcamSetup] fallback to default translation for Help key
<   580.718> [SoftcamSetup] fallback to default translation for TEXT key
<   580.725> [SoftcamSetup] fallback to default translation for RED key
<   580.732> [SoftcamSetup] fallback to default translation for YELLOW key
<   580.739> [SoftcamSetup] fallback to default translation for restart so***m
<   580.746> [SoftcamSetup] fallback to default translation for restart cardserver
<   580.753> [SoftcamSetup] fallback to default translation for restart both
<   580.768> [SoftcamSetup] fallback to default translation for so***m setup
<   580.775> [SoftcamSetup] fallback to default translation for Lets you configure your softcams
<   580.783> [SoftcamSetup] fallback to default translation for so***m setup
<   580.791> [SoftcamSetup] fallback to default translation for Lets you configure your softcams
<   587.820>  Path_Xml :  /etc/enigma2/xc/
<   587.829> No module named servicewebts
<   587.829> ERROR servicewebts
<   588.064> [iSettingE2] set language to  it
<   588.065> [iSettingE2] set language to  it
<   588.358> iSettingE2 Architecture: MIPSEL
<   589.905> [EPGImport] fallback to default translation for  always
<   589.913> [EPGImport] fallback to default translation for  only manual boot
<   589.920> [EPGImport] fallback to default translation for  only automatic boot
<   589.928> [EPGImport] fallback to default translation for  never
<   589.940> [EPGImport] fallback to default translation for  wake up and import
<   589.948> [EPGImport] fallback to default translation for  skip the import
<   589.961> [EPGImport] fallback to default translation for  Press OK
<   589.975> [EPGImport] fallback to default translation for  Monday
<   589.982> [EPGImport] fallback to default translation for  Tuesday
<   589.990> [EPGImport] fallback to default translation for  Wednesday
<   589.998> [EPGImport] fallback to default translation for  Thursday
<   590.006> [EPGImport] fallback to default translation for  Friday
<   590.014> [EPGImport] fallback to default translation for  Saturday
<   590.022> [EPGImport] fallback to default translation for  Sunday
<   590.045> [EPGImport] fallback to default translation for  EPGImport
<   590.054> [EPGImport] fallback to default translation for  EPGImport
<   590.927> Plugin  Extensions/WebInterface failed to load: No module named plugin
<   590.929> Plugin probably removed, but not cleanly in /usr/lib/enigma2/python/Plugins/Extensions/WebInterface
<   591.232> [VideoHardware] getModeList for port DVI-PC
<   591.234> [VideoHardware] getModeList for port Scart
<   591.236> [VideoHardware] getModeList for port YPbPr
<   591.241> [VideoHardware] getModeList for port Scart
<   591.244> [VideoHardware] getModeList for port DVI-PC
<   591.248> [VideoHardware] getModeList for port DVI
<   591.255> [VideoHardware] hotplug on dvi
<   591.259> [VideoHardware] -> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
<   591.295> [VideoHardware] -> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
<   591.308> [VideoHardware] -> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
<   591.320> [VideoHardware] -> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
<   591.332> [VideoHardware] setMode - port: DVI mode: 1080i rate: 50Hz
<   591.340> [VideoHardware] -> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
<   591.543> [EPGImport] autostart (0) occured at 1589563611.04
<   591.638> [EPGImport] autostart (0) occured at 1589563611.14
<   591.641> [EPGImport] WakeUpTime now set to -1 (now=1589563611)
<   591.641> [EPGImport] onBootStartCheck
<   591.643> [EPGImport] now=1589563611 wake=-1 wake-now=-1589563612
<   591.643> [EPGImport] is boot
<   591.645> [EPGImport] not starting import - is restart enigma2
<   591.664> iSettingE2 Plugin - Size Screen is: HDR (1280 x 720)
<   591.884> [SKIN] Parsing embedded skin <embedded-in-'MessageAds'>
<   591.986> [SKIN] Parsing embedded skin <embedded-in-'Screensaver'>
<   592.542> [Skin] SKIN ERROR in screen 'SecondInfoBar' widget 'widget': {Nowa-E-OrangeMOD/skin.xml}: source 'session.MSNWeather' was not found in screen 'SecondInfoBar'!. Please contact the skin's author!
<   592.543> [Skin] SKIN ERROR in screen 'SecondInfoBar' widget 'widget': {Nowa-E-OrangeMOD/skin.xml}: source 'session.MSNWeather' was not found in screen 'SecondInfoBar'!. Please contact the skin's author!
<   592.544> [Skin] SKIN ERROR in screen 'SecondInfoBar' widget 'widget': {Nowa-E-OrangeMOD/skin.xml}: source 'session.MSNWeather' was not found in screen 'SecondInfoBar'!. Please contact the skin's author!
<   592.546> [Skin] SKIN ERROR in screen 'SecondInfoBar' widget 'widget': {Nowa-E-OrangeMOD/skin.xml}: source 'session.MSNWeather' was not found in screen 'SecondInfoBar'!. Please contact the skin's author!
<   592.547> [Skin] SKIN ERROR in screen 'SecondInfoBar' widget 'widget': {Nowa-E-OrangeMOD/skin.xml}: source 'session.MSNWeather' was not found in screen 'SecondInfoBar'!. Please contact the skin's author!
<   592.549> [Skin] SKIN ERROR in screen 'SecondInfoBar' widget 'widget': {Nowa-E-OrangeMOD/skin.xml}: source 'session.MSNWeather' was not found in screen 'SecondInfoBar'!. Please contact the skin's author!
<   592.550> [Skin] SKIN ERROR in screen 'SecondInfoBar' widget 'widget': {Nowa-E-OrangeMOD/skin.xml}: source 'session.MSNWeather' was not found in screen 'SecondInfoBar'!. Please contact the skin's author!
<   592.551> [Skin] SKIN ERROR in screen 'SecondInfoBar' widget 'widget': {Nowa-E-OrangeMOD/skin.xml}: source 'session.MSNWeather' was not found in screen 'SecondInfoBar'!. Please contact the skin's author!
<   592.553> [Skin] SKIN ERROR in screen 'SecondInfoBar' widget 'widget': {Nowa-E-OrangeMOD/skin.xml}: source 'session.MSNWeather' was not found in screen 'SecondInfoBar'!. Please contact the skin's author!
<   592.554> [Skin] SKIN ERROR in screen 'SecondInfoBar' widget 'widget': {Nowa-E-OrangeMOD/skin.xml}: source 'session.MSNWeather' was not found in screen 'SecondInfoBar'!. Please contact the skin's author!
<   592.555> [Skin] SKIN ERROR in screen 'SecondInfoBar' widget 'widget': {Nowa-E-OrangeMOD/skin.xml}: source 'session.MSNWeather' was not found in screen 'SecondInfoBar'!. Please contact the skin's author!
<   592.557> [Skin] SKIN ERROR in screen 'SecondInfoBar' widget 'widget': {Nowa-E-OrangeMOD/skin.xml}: source 'session.MSNWeather' was not found in screen 'SecondInfoBar'!. Please contact the skin's author!
<   592.558> [Skin] SKIN ERROR in screen 'SecondInfoBar' widget 'widget': {Nowa-E-OrangeMOD/skin.xml}: source 'session.MSNWeather' was not found in screen 'SecondInfoBar'!. Please contact the skin's author!
<   592.559> [Skin] SKIN ERROR in screen 'SecondInfoBar' widget 'widget': {Nowa-E-OrangeMOD/skin.xml}: source 'session.MSNWeather' was not found in screen 'SecondInfoBar'!. Please contact the skin's author!
<   592.561> [Skin] SKIN ERROR in screen 'SecondInfoBar' widget 'widget': {Nowa-E-OrangeMOD/skin.xml}: source 'session.MSNWeather' was not found in screen 'SecondInfoBar'!. Please contact the skin's author!
<   592.562> [Skin] SKIN ERROR in screen 'SecondInfoBar' widget 'widget': {Nowa-E-OrangeMOD/skin.xml}: source 'session.MSNWeather' was not found in screen 'SecondInfoBar'!. Please contact the skin's author!
<   592.563> [Skin] SKIN ERROR in screen 'SecondInfoBar' widget 'widget': {Nowa-E-OrangeMOD/skin.xml}: source 'session.MSNWeather' was not found in screen 'SecondInfoBar'!. Please contact the skin's author!
<   592.565> [Skin] SKIN ERROR in screen 'SecondInfoBar' widget 'widget': {Nowa-E-OrangeMOD/skin.xml}: source 'session.MSNWeather' was not found in screen 'SecondInfoBar'!. Please contact the skin's author!
<   592.566> [Skin] SKIN ERROR in screen 'SecondInfoBar' widget 'widget': {Nowa-E-OrangeMOD/skin.xml}: source 'session.MSNWeather' was not found in screen 'SecondInfoBar'!. Please contact the skin's author!
<   592.567> [Skin] SKIN ERROR in screen 'SecondInfoBar' widget 'widget': {Nowa-E-OrangeMOD/skin.xml}: source 'session.MSNWeather' was not found in screen 'SecondInfoBar'!. Please contact the skin's author!
<   592.569> [Skin] SKIN ERROR in screen 'SecondInfoBar' widget 'widget': {Nowa-E-OrangeMOD/skin.xml}: source 'session.MSNWeather' was not found in screen 'SecondInfoBar'!. Please contact the skin's author!
<   592.570> [Skin] SKIN ERROR in screen 'SecondInfoBar' widget 'widget': {Nowa-E-OrangeMOD/skin.xml}: source 'session.MSNWeather' was not found in screen 'SecondInfoBar'!. Please contact the skin's author!
<   593.026> [SKIN] No skin to read...
<   593.527> [SKIN] No skin to read...
<   593.556> [SKIN] Parsing embedded skin <embedded-in-'Dish'>
<   593.659> [Skin] Attribute not implemented: backgroundcolor value: metrixBackground
<   593.662> [Skin] Attribute not implemented: backgroundcolor value: metrixBackground
<   593.665> warning, skin is missing element state in <class 'Screens.PVRState.TimeshiftState'>
<   593.667> [Skin] Attribute not implemented: backgroundcolor value: metrixBackground
<   593.691> RemovePopup, id = ZapError
<   593.856> [Skin] SKIN ERROR in screen 'InfoBar' widget 'widget': {Nowa-E-OrangeMOD/skin.xml}: source 'session.MSNWeather' was not found in screen 'InfoBar'!. Please contact the skin's author!
<   593.858> [Skin] SKIN ERROR in screen 'InfoBar' widget 'widget': {Nowa-E-OrangeMOD/skin.xml}: source 'session.MSNWeather' was not found in screen 'InfoBar'!. Please contact the skin's author!
<   593.859> [Skin] SKIN ERROR in screen 'InfoBar' widget 'widget': {Nowa-E-OrangeMOD/skin.xml}: source 'session.MSNWeather' was not found in screen 'InfoBar'!. Please contact the skin's author!
<   593.861> [Skin] SKIN ERROR in screen 'InfoBar' widget 'widget': {Nowa-E-OrangeMOD/skin.xml}: source 'session.MSNWeather' was not found in screen 'InfoBar'!. Please contact the skin's author!
<   593.862> [Skin] SKIN ERROR in screen 'InfoBar' widget 'widget': {Nowa-E-OrangeMOD/skin.xml}: source 'session.MSNWeather' was not found in screen 'InfoBar'!. Please contact the skin's author!
<   593.863> [Skin] SKIN ERROR in screen 'InfoBar' widget 'widget': {Nowa-E-OrangeMOD/skin.xml}: source 'session.MSNWeather' was not found in screen 'InfoBar'!. Please contact the skin's author!
<   594.368> setValue 100
<   594.411> [ePopen] command: /usr/sbin/ntpdate -s -u pool.ntp.org
<   594.489> playing 1:0:1:47:1770:110:820000:0:0:0:
<   594.499> getResolvedKey config.usage.remote_fallback failed !! (Typo??)
<   594.584> not pauseable.
<   594.589> not pauseable.
<   594.593> not pauseable.
<   594.597> new service started! trying to download cuts!
<   594.598> download failed, no cuesheet interface
<   594.599> RemovePopup, id = ZapError
<   594.787> [ePopen] command: route -n | grep  eth0
<   594.878> [ePopen] command: route -n | grep  wlan0
<   594.949> 0.0.0.0
<   594.950> 192.168
<   594.978> nameservers: [[8, 8, 8, 8], [8, 8, 4, 4]]
<   594.980> read configured interface: {'lo': {'dhcp': False}, 'wlan0': {'dhcp': False, 'netmask': [255, 255, 255, 0], 'gateway': [192, 168, 1, 1], 'address': [192, 168, 1, 3]}, 'eth0': {'dhcp': False}}
<   594.981> self.ifaces after loading: {'wlan0': {'preup': '\tpre-up wpa_supplicant -iwlan0 -c/etc/wpa_supplicant.wlan0.conf -B -dd -Dwext || true\n', 'predown': '\tpre-down wpa_cli -iwlan0 terminate || true\n', 'ip': [192, 168, 1, 3], 'up': True, 'mac': '98:de:d0:15:49:7c', 'dhcp': False, 'netmask': [255, 255, 255, 0], 'gateway': [192, 168, 1, 1]}, 'eth0': {'preup': False, 'predown': False, 'ip': [192, 168, 1, 3], 'up': False, 'mac': '00:09:34:2b:ca:31', 'dhcp': False, 'netmask': [255, 255, 255, 0], 'gateway': [192, 168, 1, 1]}}
<   594.992> AT plugin not found
<   594.993> SerienRecorder plugin not found
<   594.994> ER plugin not found
<   595.000> [OpenWebif] no plugins to load
<   595.025> [OpenWebif] started on 80
<   595.655> [eDVBPESReader] Created. Opening demux
<   595.655> [eDVBPESReader] Created. Opening demux
<   595.659> not pauseable.
<   595.663> not pauseable.
<   595.688> RemovePopup, id = ZapError
<   596.188> [Dish] tuning failed
<   636.406> action ->  InfobarMenuActions mainMenu
<   636.407> loading mainmenu XML...
<   636.433> TimerEdit TimerEditList
<   636.436> PluginBrowser PluginBrowser
<   636.443> [EPGImport] fallback to default translation for  EPG Importer
<   638.215> action ->  OkCancelActions ok
<   638.215> okbuttonClick
<   638.217> ttttppppooorrrtttt:  exampleserver.com:8888
<   638.220> xtream_e2portal_url =  http://exampleserver.com:8888/enigma2.php
<   638.220> username =  Enter Username
<   638.221> password =  ******
<   638.221> plugin_version =   2.9
<   638.222> XCplugin Mod. E2 Plugin v.  2.9 Lite
<   638.222> -----------CONFIG NEW END----------
<   638.242> url_info2 =  
<   638.269> unknown url type: 
<   638.269> ERROR user_info
<   638.272> [SKIN] Parsing embedded skin <embedded-in-'xc_Main'>
<   638.352> Traceback (most recent call last):
<   638.353>   File "/usr/lib/enigma2/python/Components/ActionMap.py", line 66, in action
<   638.353>   File "/usr/lib/enigma2/python/Components/ActionMap.py", line 46, in action
<   638.354>   File "/usr/lib/enigma2/python/Screens/Menu.py", line 51, in okbuttonClick
<   638.354>   File "/usr/lib/enigma2/python/Tools/BoundFunction.py", line 9, in __call__
<   638.355>   File "/usr/lib/enigma2/python/Plugins/Extensions/XCplugin/plugin.py", line 3586, in Start_iptv_player
<   638.386>     session.openWithCallback(check_configuring, xc_Main)  
<   638.386>   File "/usr/lib/enigma2/python/mytest.py", line 279, in openWithCallback
<   638.388>     dlg = self.open(screen, *arguments, **kwargs)
<   638.388>   File "/usr/lib/enigma2/python/mytest.py", line 289, in open
<   638.390>     dlg = self.current_dialog = self.instantiateDialog(screen, *arguments, **kwargs)
<   638.390>   File "/usr/lib/enigma2/python/mytest.py", line 232, in instantiateDialog
<   638.392>     return self.doInstantiateDialog(screen, arguments, kwargs, self.desktop)
<   638.392>   File "/usr/lib/enigma2/python/mytest.py", line 256, in doInstantiateDialog
<   638.394>     dlg.applySkin()
<   638.394>   File "/usr/lib/enigma2/python/Components/GUISkin.py", line 119, in applySkin
<   638.395>   File "/usr/lib/enigma2/python/Components/GUISkin.py", line 20, in createGUIScreen
<   638.396>   File "/usr/lib/enigma2/python/Components/GUIComponent.py", line 108, in GUIcreate
<   638.396>   File "/usr/lib/enigma2/python/Components/Renderer/xcRunningText.py", line 96, in postWidgetCreate
<   638.397>     self.mTimer_conn = self.mTimer.timeout.connect(self.movingLoop)
<   638.398> AttributeError: 'eBaseImpl.eTimer' object has no attribute 'connect'
Avevo precedentemete come immagine,una open plu 4 con xc plugin funzionante, (ma non so quale versione fosse ). Ho dovuto reinstallare tutto per altri motivi, da allora non riesco più a far funzionare xc plugin ,con nessun a immagine.appena provo ad avviare il plugin, crasha tutto.. spero che Lululla possa aiutarmi.

Ha scritto dopo 1 ora 59 secondi:
Finalmenteeeeee, risolto con questa versione di xc plugin e questa guida:

scaricare il file
2° aprire la cartella etc/enigma2/ e modificare il file xc_e2_plugin.xml
3° devi impostare i tuoi dati nel file xc_e2_plugin.xml inserendo l user e pass e modificare il server!!
esempio: devi mettere il nome del tuo server da[CDATA[http://xxxxxxxxxxxx/enigma2.php]] (dove stanno le x mettere il server) e poi alla riga seguente dopo username xxxxx user> stessa cosa fai alla stringa dopo password................. salvi
4° apri filezilla apri cartella etc/enigma2/ e inserisci il file xc_e2_plugin.xml (modificato con user e pass)
5° apri il file scaricato nel punto 1° e andare su usr/lib/enigma2/python/plugins/extensions ed a questo punto mettere la cartella xcplugin su filezilla nella cartella usr/lib/enigma2/python/plugins/extensions
6° riavviare il decoder
@kkt è vietato da regolamento inserire link esterni al sito. Facciamo attenzione. Questo è un modo " barbaro" ( lo definirei ) di installare un plugin vorrei precisare che non è la via corretta solitamente. Nel tuo caso ha funzionato ma tutte le dipendenze derivanti dal control del plugin vengono meno non credo possa funzionare nel migliore dei modi. E' una avvertenza questa per evitare che altri utenti possano seguire la stessa via che reputo non corretta tecnicamente.
Saluti.
kkt ha scritto:Avevo precedentemete come immagine,una open plu 4 con xc plugin funzionante, (ma non so quale versione fosse ). Ho dovuto reinstallare tutto per altri motivi, da allora non riesco più a far funzionare xc plugin ,con nessun a immagine.appena provo ad avviare il plugin, crasha tutto.. spero che Lululla possa aiutarmi.

Ha scritto dopo 1 ora 59 secondi:
Finalmenteeeeee, risolto con questa versione di xc plugin e questa guida:

scaricare il file
2° aprire la cartella etc/enigma2/ e modificare il file xc_e2_plugin.xml
3° devi impostare i tuoi dati nel file xc_e2_plugin.xml inserendo l user e pass e modificare il server!!
esempio: devi mettere il nome del tuo server da[CDATA[http://xxxxxxxxxxxx/enigma2.php]] (dove stanno le x mettere il server) e poi alla riga seguente dopo username xxxxx user> stessa cosa fai alla stringa dopo password................. salvi
4° apri filezilla apri cartella etc/enigma2/ e inserisci il file xc_e2_plugin.xml (modificato con user e pass)
5° apri il file scaricato nel punto 1° e andare su usr/lib/enigma2/python/plugins/extensions ed a questo punto mettere la cartella xcplugin su filezilla nella cartella usr/lib/enigma2/python/plugins/extensions
6° riavviare il decoder

Puoi aiutare me a configurarlo?@kkt,

Ha scritto dopo 34 minuti 54 secondi:
dopo svariati tentativi sono riuscito ad installare plugin e tramite file m3u savato nella cartella etc/enigma2/xc riesco a vedere la mia lista perfettamente funzionante
Ho due problemi però:il primo è che una volta cercato il film mi riporta alla schermata precedente(cioè alla lista) il secondo è che se provo a scaricare qualcosa mi porta fino alla barra dell'avanzamento del download per poi rimanere a 0/100
Spero che qualcuno possa aiutarmi,a me interessa soprattutto per il tasto cerca.
Grazie mille
Ma nessuno legge la prima pagina dove ci sono le istruzioni su come si installa il plugin ??? Per l'uso del tasto cerca rimando la risposta a @lululla che potrà meglio chiarirti appena potrà rispondere. Saluti.
certo che l'ho letta ed ho avuto difficoltà a fare allo stesso modo,ma il plugin in se mi funziona,mi serve più che altro solo il tasto cerca per questo chiedevo,la funzione download è bella sicuramente ma se non mi funziona posso farne a meno.Aspetto vostre ragà
@strano molte volte le funzioni di download sono inibite dai servers che utilizzano anti-leech per non far scaricare loro contenuti. Per cui valuterei anche questo scenario, per il tasto cerca così come descrive @lululla non ti so dire altro. Di certo è che sta per uscire la nuova versione 3.0 così almeno disse lululla. Saluti.
HELP ME qualcuno che sa dirmi come far funzionare il tasto search?a me la ricerca non sortisce effetto e torna alla schermata delle categorie del plugin
Molti cambiamenti sono stati fatti nella prossima versione a venire.
XC Infinity

per la ricerca se ti poni nella lista dove vedi tutti i canali (eccetto le series) dovresti avere il testo della ricerca in lista.

:)
@lululla ho provato ma dopo che sono nella schermata del testo,e avviato ricerca della cosa interessata mi riporta alla schermata precedente senza aver riportato nessun risultato
Immagine

Immagine

Immagine

Immagine

Immagine


ora anche dal LOader M3u si possono scaricare i movie.. oltre che il file m3u della lista

ciao
Immagine
  • 1
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13

@luc93 buongiorno, onestamente non ho Idea di[…]

Buonasera, grazie ho capito

AGGIORNAMENTO FEBBRAIO 2024: https://sat.technol[…]

AGGIORNAMENTO FEBBRAIO 2024: https://sat.techno[…]