[Nemoxyz]

@Plutone72

LINKS donwload utili
- NotePAD++ download QUI ( modifica file di testo , xml etc etc )
- Putty-telnet donwload QUI ( invio comandi shell telnet )
- FTPclient Filezilla download QUI ( invio files FTP )
- FTPclient winSCP download QUI ( invio files FTP )

[patacca65]

ciao dopo aver letto le guide ho provato a cambiare immagine ma non riesco ho formattato varie chiavette prima di tutto con quella con il tasto reset non va poi ho provato con il bootmenu prima con la cartella h9 e le altre due niente ,poi ho provato con la cartella zippata ma mi dice che immagine invalid dove sbaglio grazie

[Nemoxyz]

@patacca65 che modello di h9 hai ?? H9.2h o H9 combo ??

[patacca65]

si e combo con le due slot ho pensato che fosse difettato

[Nemoxyz]

@patacca65 spostato sotto il topic guida di riferimento !!! avevi scritto esternamente non serviva.
leggi in prima pagina >> [GUIDA] FLASH ZGEMMA H9 Combo 4k c'è scritto come flashare il tuo decoder segui passo passo non ti puoi sbagliare. Se hai problemi dove e quando scrivi qui cosa non riesci a fare.

[patacca65]

mi fa fare bootmenu local ,scelgo la chiavetta seleziono il file e mi dice invalid image

[Nemoxyz]

@patacca65 segui istruzioni di prima pagina ? se si allora devi formattare la pennetta in fat32 in modo completo non la riconosce.

[patacca65]

mi consigliate una chiavetta da comprare le mie non vanno le ho formattate in tutti i modo ma non vanno ne ho provate 4 ma niente

[corvo18]

@patacca65

H9 combo ha 1 slot card anteriore e 1 common interface posteriore.

Ripeti questa procedura usando il file recovery..

1) Ho preso il file recovery_emmc
2) Dezippato il file sul desktop. Sono presenti i seguenti file:

h9combo (cartella)
recovery_zgemmah9combo_READ.me
bootargs.bin
fastboot.bin

3) Formatto chiavetta USB 8GB FAT32.

4) Copio tutti i file e la cartella 'h9combo' nella directory principale della chiavetta USB.

5) Spengo da dietro il decoder

6) Inserisco la chiavetta USB alla porta USB 2.0 anteriore, dietro lo sportello anteriore.

7) Premo il pulsante di ripristino RESET posteriore.

8) Accendo da dietro mentre si tiene premuto il pulsante di ripristino.

9) Appena esce FLSH sul display, lascio il pulsante di ripristino

10)Parte l'aggiornamento e il decoder verrà riavviato nel menu di recupero

Spengo il decoder da dietro, levo usb, la formatto fat32, inserisco immagine senza decomprimerla,inserisco usb al decoder, accendo da dietro e contemporaneamente premo il tasto power del telecomando ed entro nel menu di recupero

Seleziono 'Bootmenu' e premo OK sul telecomando.

Nella schermata successiva seleziono 'Flash local image' e premo OK sul telecomando.

Nella schermata successiva seleziono la chiavetta USB in cui si trova il file zip dell'immagine.

Seleziono il file zip Openpli 7.1_mmc che si trova sulla chiavetta USB che desidero flashare e premo OK sul telecomando.

Ora seleziono su quale slot voglio inserire la Openpli 7.1.

Una volta completato e finito il caricamento è possibile selezionare l'immagine in cui si desidera avviare il decoder e premere OK sul telecomando.

[patacca65]

ok provo grazie

[Salverix83]

Salve ho diversi problemi a installare il mio nuovo decoder zgemma h 9 combo sarà perché sono neofita ma non riesco a collegarlo a internet con il Ei fi(, ho linea hot spot ecc...) poi non mi riconosce il satellite e non fa ricerca canali e infine non riesco a installare immagini openEsi fornita dal sito...aiuto! Grazie

[Nemoxyz]

@Salverix83 spostato nel topic adatto!!! leggi in prima pagina come si flasha lo zgemma H9 combo. saluti.

[Medardo]

Ho installato sia le versioni OPENATV 6.4 GST1.17 EXTEP3 CBCGOLD INTERSTELLAR che OPENPLI 7.X EXTEP3 GSTPLAYER NIGHTSTALKHD-V2 in seguenza entrambe nella porzione 1 del multiboot in maniera che la seconda cancellasse la prima. Per entrambe ricevo una schermata di errore di software, immagine che allego insieme al testo del crashlog, che per quel che ne capisco potrebbe essere legato al software linux installato di fabbrica. C'è un modo per flashare ex novo la eprom e partire di nuovo? Grazie per l'aiuto.



OpenPLi Enigma2 crash log

Codice: Seleziona tutto

crashdate=gio gen  1 01:00:21 1970
compiledate=May 18 2020
skin=SatTEK-NightStalkHD/skin.xml
sourcedate=2020-05-11
branch=release-7.2
rev=fb7d104
component=Enigma2

stbmodel=h9combo
stbmodel=h9combo
kernelcmdline=root=/dev/mmcblk0p23 rootsubdir=linuxrootfs1 rootfstype=ext4 kernel=/dev/mmcblk0p19 console=ttyAMA0,115200 blkdevparts=mmcblk0:1M(fastboot),1M(bootargs),18M(recovery),2M(bootoptions),2M(deviceinfo),4M(baseparam),4M(pqparam),4M(logo),40M(fastplay),20M(kernel),20M(trustedcore),4M(misc),1024M(system),150M(vendor),306M(dvb),256M(cache),50M(private),8M(securestore),16M(linuxkernel1),16M(linuxkernel2),16M(linuxkernel3),16M(linuxkernel4),-(userdata) hbcomp=/dev/block/mmcblk0p13 mem=937M mmz=ddr,0,0,48M vmalloc=500M
nimsockets=NIM Socket 0:
imageissue=***************************************************************


g   (wv¶   H{%F   __del__     Š   (wv¶   Ö5©s   __add__     V   (wv¶   cŠå   __radd__    Y   (wv¶   y]à·   __sub__     M   (wv¶   w   __rsub__    t   (wv¶   õ¦Ý   __mul__     u   (wv¶   ük¼   __rmul__    <   (wv¶   ò½n¡   __div__     ^   (wv¶   *¼‚   __rdiv__    :   (wv¶   gM͈   __mod__     C   (wv¶   0Œë   __rmod__    ;   (wv¶
   ÕÔ‰q   __divmod__  =   (wv¶   B“oU   __rdivmod__ 8   (wv¶   Uº‹ù   __pow__     8   (wv¶    çâT   __rpow__    Q   (wv¶   õÕk†   __neg__     }   (wv¶   ±ùL   __pos__     7   (wv¶   /³Î   __abs__     s   (wv¶   d`^   __nonzero__ :   (wv¶
   Foã   __invert__  1   (wv¶
   VJè   __lshift__  J   (wv¶   Õ£!   __rlshift__ b   (wv¶
    húå   __rshift__  0   (wv¶   “§Ä   __rrshift__ O   (wv¶   g
   __and__     =   (wv¶   ¡x   __rand__    O   (wv¶   ðpž&   __xor__     .   (wv¶   ]z;5   __rxor__    ?   (wv¶   Õ•]N   __or__      =   (wv¶   &?V   __ror__     :   (wv¶
   IQæ   __coerce__  W   (wv¶    ®pâ   __int__     <   (wv¶   z&Ì   __long__    J   (wv¶	   3àÈ   __float__   $   (wv¶   YàÀÚ   __oct__     .   (wv¶   ØèNf   __hex__     +   (wv¶   nÝÝ   __iadd__    J   (wv¶   AÇKé   __isub__    3   (wv¶   åõá   __imul__    %   (wv¶   ÊÅçB   __idiv__    $   (wv¶   ›´ë¸   __imod__    3   (wv¶   ñgÿÕ   __ipow__       (wv¶   Þ|b   __ilshift__ (   (wv¶   ¬Ð   __irshift__ ?   (wv¶   ¤F;‰   __iand__    !   (wv¶   <s¶6   __ixor__    D   (wv¶   ñ|´9   __ior__     D   (wv¶   ’PÉ=   __truediv__ U   (wv¶	   ù_ì@   __index__   þ   (wv¶   >%Á•   __len__     $  (wv¶   FÚòÈ   __getitem__ ë   (wv¶   Ò"¿€   __setitem__ o   (wv¶   a ¿   __delitem__ w   (wv¶
   Œè   __reduce__  *   (wv¶
   «73z   __format__  $   (wv¶
   š)¥à   __sizeof__  j  (wv¶	   -†[   __class__       ô¶þÿÿÿ-†[   $€v¶   ìv¶T  (wv¶   =Íì   __doc__         ô¶þÿÿÿ       $€v¶   ìv¶   (wv¶	   ì­wW   __flags__ _    (wv¶   +äŠ    __base__       (wv¶   ¯…nÝ   __mro__     r  (wv¶   ÙŽú<   __name__      (wv¶	   ³<°§   __bases__   (
  (wv¶
   ‚L{O   __module__  £  (wv¶   ÆP£   __dict__ _       ¶þÿÿÿ=Íì   $€v¶   ìv¶    P¶þÿÿÿ=Íì   $€v¶   ìv¶    €¶þÿÿÿ=Íì   $€v¶   ìv¶1   (wv¶   Þ¯‰   __unicode__     °¶þÿÿÿ=Íì   $€v¶   ìv¶   (wv¶	   —4€   conjugate _ 
   (wv¶
   :[|:   bit_length     (wv¶	   çTË	   __trunc__      (wv¶   @®   real mat__     (wv¶   JµÍ¸   imag           (wv¶	   ì&]W   numerator      (wv¶   ËãqÓ   denominator     à¶þÿÿÿ=Íì   $€v¶   ,v¶    ¶þÿÿÿ=Íì   $€v¶   ìv¶    @¶þÿÿÿ=Íì   $€v¶   ìwv¶"  (wv¶   dáº0   join __  __ Ç  (wv¶   µ·   split          (wv¶   \2²õ   rsplit      ¡   (wv¶   âõ¤   lower       9   (wv¶   ¨«/   upper          (wv¶   øêmß   islower        (wv¶   ûª|â   isupper        (wv¶   =h#D   isspace        (wv¶   ˜WöB   isdigit        (wv¶   ½è:•   istitle        (wv¶   3#ŸR   isalpha        (wv¶   &ƒ¨   isalnum        (wv¶
   Üñ$ƒ   capitalize  w   (wv¶   `Ÿ¾~   count lize  \   (wv¶   ’Mù   endswith       (wv¶	   ëã™å   partition      (wv¶   Ô…
   find tion   ;  (wv¶   ¡˜à}   index       #   (wv¶   ˆ`n   lstrip      Ú   (wv¶ø^ Ðõ¶šô¶{l¶ÀÐ`¶ÀÐ`¶ØK¶ÀÐ`¶ÀÐ`¶ÀÐ`¶˜©a¶Åa¶h„n¶¨ ¶Dd¶4,e¶4a¶ÀÐ`¶@k¶¸8g¶Lƒn¶ÀÐ`¶âd¶@Vj¶ÀÐ`¶`Yf¶Äºa¶ÀÐ`¶(.g¶Œa¶a¶d(f¶ÀÐ`¶˜&f¶\k¶ÀÐ`¶|*d¶ÄŠl¶ÀÐ`¶ÀÐ`¶ÀÐ`¶ø p¶ÀÐ`¶ÀÐ`¶ÀÐ`¶ÀÐ`¶ÀÐ`¶`.¶ÀÐ`¶ÀÐ`¶n¶lóf¶ÀÐ`¶,÷m¶ÀÐ`¶Äk¶ÀÐ`¶P°i¶ÀÐ`¶ÀÐ`¶Ha¶¤ñm¶ÀÐ`¶dÃo¶‘ ¶Ìd¶Øed¶ÀÐ`¶ÀÐ`¶ÀÐ`¶ÀÐ`¶ÀÐ`¶ÀÐ`¶ÀÐ`¶ÀÐ`¶ÀÐ`¶ÀÐ`¶.¶<‹b¶üÖd¶ÀÐ`¶ÀÐ`¶ÀÐ`¶ n¶ Ía¶ÀÐ`¶ÀÐ`¶ÀÐ`¶tŒc¶ÀÐ`¶ÀÐ`¶(Ÿm¶¤¤a¶ÀÐ`¶DŽl¶ÌEe¶ä+i¶ÀÐ`¶ÀÐ`¶­a¶0 k¶k¶×d¶ìƒn¶¨5g¶œ‹c¶¨Ød¶|Þd¶(Óa¶ÀÐ`¶,‹m¶°.¶Ãi¶4‡l¶´|d¶ÀÐ`¶ø!c¶ÀÐ`¶ÀÐ`¶ÀÐ`¶ÀÐ`¶Ðma¶ÀÐ`¶ŒN¶ÀÐ`¶ÀÐ`¶Œ¢d¶HŽf¶ÀÐ`¶ÀÐ`¶ÀÐ`¶ÀÐ`¶ “"¶pŠm¶Ü
k¶p( ¶èAc¶ø:c¶HÊn¶p¡d¶ÀÐ`¶4Gf¶ÀÐ`¶ÀÐ`¶`k¶ÀÐ`¶Tk¶Ü§a¶ÀÐ`¶ÀÐ`¶ÀÐ`¶¼ a¶x§d¶T5g¶ÀÐ`¶ÀÐ`¶øŶÀÐ`¶ÀÐ`¶ÀÐ`¶ÀÐ`¶ÀÐ`¶¥a¶ ff¶`7g¶ŒÁg¶ÀÐ`¶Ì‡m¶ÀÐ`¶ÀÐ`¶ÀÐ`¶|l¶ÀÐ`¶ÀÐ`¶¬}m¶ÀÐ`¶ÜÉa¶ ¾o¶„Le¶,—a¶ÀÐ`¶|Yf¶ÀÐ`¶ø©i¶è(i¶f¶Tªd¶ à¶ œa¶lÞe¶”De¶Øn¶ÀÐ`¶¤x-¶Täi¶Hpf¶ œ ¶l3m¶ÀÐ`¶ÀÐ`¶€nf¶°¸a¶ÀÐ`¶k¶`…o¶ÀÐ`¶Àj¶ÀÐ`¶ÀÐ`¶ Üd¶ÀÐ`¶­%¶ÀÐ`¶ÀÐ`¶(c¶ÀÐ`¶ÀÐ`¶k¶(gf¶ÀÐ`¶ÀÐ`¶ä†o¶ÀÐ`¶$Œc¶¬…f¶p m¶ÀÐ`¶ä¢n¶äÅc¶#p¶Œ¡m¶”Òa¶ÜTj¶ÀÐ`¶Tãa¶ÀÐ`¶Tže¶<‚n¶ÀÐ`¶ÀÐ`¶T«a¶Äâg¶¼€f¶ÀÐ`¶ˆŒo¶¯a¶ÀÐ`¶ÀÐ`¶`ˆ6¶ÀÐ`¶è綸^¶<g¶L$ ¶,¿o¶¨[f¶ÀÐ`¶ÀÐ`¶<]f¶ÀÐ`¶ ¶°íd¶0"¶ÀÐ`¶ÀÐ`¶x|f¶ÀÐ`¶à3c¶Dia¶dÀi¶¼Žm¶ÀÐ`¶$áa¶ÀÐ`¶än¶@k¶ôaf¶8àn¶ëi¶ða¶`n¶ÀÐ`¶€n¶X§a¶8 p¶ÀÐ`¶øk¶ÀÐ`¶ÀÐ`¶ÀÐ`¶ÀÐ`¶ÀÐ`¶ôpi¶ÀÐ`¶@×n¶Tþn¶øn¶ÀÐ`¶Ôa¶èµa¶ÀÐ`¶Ça¶ˆMn¶´¡"¶ ¯m¶¨ m¶ÀÐ`¶ ü$¶$Üa¶ÀÐ`¶ÀÐ`¶ÀÐ`¶H!f¶Ç¶ÀÐ`¶àÇa¶ÀÐ`¶ÀÐ`¶ÀÐ`¶ÀÐ`¶ÀÐ`¶ÀÐ`¶o¶ÀÐ`¶Ô"c¶D"p¶ÔÁa¶ÀÐ`¶×d¶H)a¶ÀÐ`¶ÀÐ`¶Hk¶ÀÐ`¶€m¶Äûi¶ÀÐ`¶ÀÐ`¶ÀÐ`¶¨“f¶ÀÐ`¶ÀÐ`¶ÀÐ`¶8æg¶4Êe¶l´g¶ÀÐ`¶ÀÐ`¶ÀÐ`¶L¢d¶qh¶àK ¶ÀÐ`¶ÀÐ`¶”–l¶ÀÐ`¶ÀÐ`¶ÐMf¶t7.¶ÀÐ`¶À“"¶ÀÐ`¶< e¶<k¶ÀÐ`¶§d¶0èa¶ÐÃd¶ÀÐ`¶ìÞg¶o¶è–n¶ÀÐ`¶ÀÐ`¶ÀÐ`¶$je¶ÀÐ`¶,wf¶0Žf¶  m¶ÀÐ`¶ÀÐ`¶ÀÐ`¶Øf¶D±m¶|Ô$¶œk¶Àk¶Àû$¶ ”"¶¨¦a¶4do¶9.¶ÀÐ`¶ÀÐ`¶,Šj¶ôì¶ÀÐ`¶ b¶´]o¶ÀÐ`¶xco¶H°i¶ÀÐ`¶ÀÐ`¶ÀÐ`¶ÀÐ`¶ÀÐ`¶ÀÐ`¶à¤a¶0&.¶(©d¶˜¤n¶Áa¶Ü¥j¶È¤n¶ÀÐ`¶ÀÐ`¶ zo¶èán¶4Ãa¶ÀÐ`¶ÀÐ`¶ìd¶  ¶¨Mo¶ÀÐ`¶°Šl¶<üV¶ÐÂn¶0[¶þn¶´%i¶$šf¶à>j¶ÀÐ`¶Ü¹b¶ÀÐ`¶ÀÐ`¶xäd¶ÀÐ`¶ÀÐ`¶ ed¶ÀÐ`¶ÀÐ`¶ÀÐ`¶Lh¶ÀÐ`¶àke¶4Âo¶ÀÐ`¶ÔDe¶ÀÐ`¶x
k¶”½n¶ø+d¶ì•e¶ÀÐ`¶Ìqa¶$‹o¶(c¶ -"¶¸k¶ü~f¶œf¶/d¶ˆ—a¶ÀÐ`¶ÀÐ`¶œk¶¸Ÿa¶ø@f¶ÀÐ`¶ì¦e¶¬ðc¶˜ò¶0»a¶h~d¶©m¶¨i¶@l¶ qa¶ÀÐ`¶x¥m¶ðl¶Œk¶°¸b¶ÀÐ`¶ÀÐ`¶ˆéa¶Ü!d¶àk¶ÀÐ`¶X7j¶ÀÐ`¶ÀÐ`¶Ìºo¶ÀÐ`¶ÀÐ`¶<df¶Ae¶ÀÐ`¶ÀÐ`¶hÁ¶f¶ÀÐ`¶ÀÐ`¶Ä®b¶¸=n¶¸i¶°îo¶°$f¶X ¶ÀÐ`¶°Án¶ÀÐ`¶¬p¶h¤a¶üÎe¶¬êi¶D‰l¶¼¬g¶¤a¶ÀÐ`¶Œf¶Œ%i¶¸ãd¶ÀÐ`¶ÀÐ`¶ÐÙ¶€98¶Àe¶¸Ù¶ÀÐ`¶Ão¶lîo¶ÀÐ`¶ÀÐ`¶¬k¶ Òa¶“o¶¤.¶à‹c¶ÀÐ`¶ÀÐ`¶ÀÐ`¶ÀÐ`¶ÀÐ`¶,Óg¶ÀÐ`¶ˆsf¶ Ù¶ÈÉn¶üê$¶`“"¶ÀÐ`¶ÀÐ`¶df¶ÀÐ`¶œß¶’e¶È§d¶$çi¶4¦a¶Ä«k¶Dc¶dZo¶èþf¶ÀÐ`¶Ô7h¶ÀÐ`¶ôm¶Dk¶°	k¶Üåa¶hÎe¶ÀÐ`¶`lf¶À™n¶ÀÐ`¶ÀÐ`¶ÀÐ`¶ÀÐ`¶ÀÐ`¶ÀÐ`¶A ¶ÔÃc¶ÀÐ`¶ÀÐ`¶ÀÐ`¶¡m¶ÀÐ`¶ÀÐ`¶¸"p¶p9.¶,
k¶ÀÐ`¶  ¶l”e¶°Jg¶ÀÐ`¶$a¶”1g¶(Mn¶Ô1g¶ôn¶ Ða¶ÀÐ`¶¤?e¶ˆ k¶Td¶¨ n¶ÀÐ`¶8Pn¶ÀÐ`¶tŽl¶ÀÐ`¶ÀÐ`¶ÀÐ`¶H
k¶ÀÐ`¶\÷m¶ÀÐ`¶P¦a¶ÀÐ`¶|¦a¶ÀÐ`¶Ùd¶|âg¶PJo¶Dán¶dÖa¶LŽf¶„ßg¶ô'f¶l¶ÀÐ`¶ø%c¶ÀÐ`¶DÔa¶<€¶T.¶ÀÐ`¶¼ûl¶ÀÐ`¶Lf¶0k¶ØDe¶Œk¶ìi¶Îa¶`io¶ôîo¶ÀÐ`¶¸²b¶(ñm¶ÀM.¶ì’m¶À@p¶ÀÐ`¶ÀÐ`¶äi¶¨ ¶ÀÐ`¶Ààg¶ÀÐ`¶ÀÐ`¶ÀÐ`¶ÀÐ`¶à“"¶¸¦m¶ÀÐ`¶ÀÐ`¶ÀÐ`¶¸ý-¶d2d¶°+ ¶ÀÐ`¶àf¶D±e¶¸wd¶”Žl¶Ük¶0šn¶$Ád¶0vf¶ÀÐ`¶ÀÐ`¶`mh¶ä ¶ôðm¶Ü4d¶ÀÐ`¶hèg¶h‚n¶ÀÐ`¶ÀÐ`¶Tc¶\¾o¶,îo¶ÀÐ`¶„ f¶ af¶ÀÐ`¶ÀÐ`¶„k¶ÀÐ`¶´Ø$¶ÀÐ`¶ÀÐ`¶,”l¶ &i¶„®¶ja¶(k¶0k¶ .¶ÀÐ`¶¤á¶„$d¶<–m¶xk¶ÀÐ`¶ìÀn¶¸¤a¶Lòm¶ÀÐ`¶œ>e¶ÀÐ`¶ÀÐ`¶ÀÐ`¶±# ¶ÀÐ`¶è¿o¶ÀÐ`¶ÀÐ`¶¨á$¶àýn¶ÀÐ`¶D³a¶´n¶äH¶@Íe¶ÀÐ`¶Ø¾n¶è;8¶œîd¶ÀÐ`¶<÷m¶ä&j¶L÷m¶ÀÐ`¶ÀÐ`¶´ò¶|k¶½o¶ÀÐ`¶ÀÐ`¶ˆ‡j¶ÀÐ`¶ÀÐ`¶ÀÐ`¶œf¶LTn¶ÀÐ`¶ÀÐ`¶€f¶°­%¶ÀÐ`¶ÀÐ`¶ÀÐ`¶l4g¶ÀÐ`¶œœe¶\	j¶ÀÐ`¶ü i¶ÀÐ`¶ŒBg¶ÀÐ`¶ f¶ÀÐ`¶ÀÐ`¶L«k¶üM¶e¶L£¶ÀÐ`¶ÀÐ`¶×a¶ÀÐ`¶<R¶ÀÐ`¶ˆs¶üi¶ì‡j¶ÀÐ`¶¼˜a¶ÀÐ`¶sf¶ÀÐ`¶Üj¶ÀÐ`¶ÀÐ`¶|na¶x'a¶ÀÐ`¶ÀÐ`¶ä&f¶P ¶ÀÐ`¶of¶p"p¶¤No¶ÀÐ`¶ÀÐ`¶@¡m¶Ôa¶ Ía¶˜Yf¶ÀÐ`¶ÀÐ`¶(	o¶ ƶŒ0g¶„i¶ÀÐ`¶€Âd¶Ìk¶ÀÐ`¶ a¶ÀÐ`¶d¹b¶ÀÐ`¶ðk¶ìœi¶ÀÐ`¶|n¶ÀÐ`¶ÀÐ`¶(áa¶Êd¶à†l¶ÀÐ`¶Àk¶´›n¶Àm¶ÀÐ`¶ÀÐ`¶Ÿi¶,f¶ÀÐ`¶(vf¶ÀÐ`¶ÀÐ`¶”ĶŒÞ¶ÀÐ`¶ÀÐ`¶ÀÐ`¶ lf¶Ìo¶ ¶¬4"¶Äãa¶èõf¶ÀÐ`¶üd¶ÀÐ`¶ÀÐ`¶ð%f¶ÀÐ`¶¬Þa¶ áa¶lÌa¶ÀÐ`¶<Zf¶ÀÐ`¶,¤a¶ìk¶(Ða¶È+g¶Tna¶d6.¶a¶0Rp¶Àˆd¶ÀÐ`¶ÀÐ`¶ ó¶ÀÐ`¶ÌŽl¶¸£n¶À
ò¶Œi¶Xj¶(šn¶ §m¶<Pp¶ÀÐ`¶®b¶ÀÐ`¶L=h¶ ¶ÀÐ`¶¨<8¶ÀÐ`¶pf¶4ãn¶¨Þg¶ÀÐ`¶ÀÐ`¶ÀÐ`¶(‹c¶ÀÐ`¶øèi¶ÀÐ`¶Ô¦a¶ÀÐ`¶ÀÐ`¶ ¨m¶ø¼n¶H¯b¶ðk¶ÔJo¶ÀÐ`¶ÀÐ`¶ÀÐ`¶0Ín¶ØÄg¶¬4g¶«k¶ÀÐ`¶ÀÐ`¶´ºd¶ÀÐ`¶ÀÐ`¶ô™n¶øüf¶8f¶ÐQf¶8Of¶Êd¶ÀÐ`¶ÀÐ`¶ÀÐ`¶0ni¶ÀÐ`¶ì(f¶ÀÐ`¶Àk¶ÀÐ`¶˜”g¶Ø’f¶ÀÐ`¶€§e¶|k¶H°a¶è«a¶Pcf¶`‹c¶6b¶¬k¶ÀÐ`¶„öm¶l9.¶¨a¶$Åc¶ÀÐ`¶l¶d×n¶ÀÐ`¶02g¶ÀÐ`¶ÀÐ`¶Àªa¶Ø·m¶€Ù$¶lØd¶$f¶ÀÐ`¶ þi¶`æ¶, ¶ÀÐ`¶ÀÐ`¶ÀÐ`¶4Ô$¶û$¶ÀÐ`¶ÀÐ`¶ÀÐ`¶à>e¶ÀÐ`¶4»e¶PY¶ÀÐ`¶ÀÐ`¶Ä.j¶ÀÐ`¶@k¶ÀÐ`¶ÀÐ`¶Žf¶$[k¶ÀÐ`¶ÀÐ`¶ÀÐ`¶Ä±g¶ÀÐ`¶ Ên¶`.¶Ì¤a¶ÄÔ$¶ÀÐ`¶P“m¶ÀÐ`¶ÀÐ`¶XýV¶ÀÐ`¶ÀÐ`¶ÀÐ`¶âg¶ÀÐ`¶

dmesg

<6>Console: colour dummy device 80x30
<6>Calibrating delay loop... 3170.30 BogoMIPS (lpj=1585152)
<6>pid_max: default: 32768 minimum: 301
<6>Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
<6>Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
<6>CPU: Testing write buffer coherency: ok
<6>ftrace: allocating 26778 entries in 79 pages
<6>CPU0: update cpu_capacity 1024
<6>CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
<6>Setting up static identity map for 0x8280 - 0x82d8
<4>CPU: hi3798mv200
<7>CPU1: powerup
<6>CPU1: update cpu_capacity 1024
<6>CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
<7>CPU2: powerup
<6>CPU2: update cpu_capacity 1024
<6>CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
<7>CPU3: powerup
<6>CPU3: update cpu_capacity 1024
<6>CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
<6>Brought up 4 CPUs
<6>SMP: Total of 4 processors activated (12681.21 BogoMIPS).
<6>CPU: All CPU(s) started in SVC mode.
<6>CPU3: update max cpu_capacity 1024
<6>devtmpfs: initialized
<6>VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
<6>clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
<4>PCIe read alloc area phyaddr 08  size 00000000
<4>PCIe write alloc area phyaddr 08  size 00000000
<6>NET: Registered protocol family 16
<6>DMA: preallocated 256 KiB pool for atomic coherent allocations
<6>CPU2: update max cpu_capacity 1024
<6>hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
<6>hw-breakpoint: maximum watchpoint size is 8 bytes.
<6>Serial: AMBA PL011 UART driver
<6>f8b00000.uart: ttyAMA0 at MMIO 0xf8b00000 (irq = 25, base_baud = 0) is a PL011 rev2
<6>console [ttyAMA0] enabled
<6>f8b02000.uart: ttyAMA1 at MMIO 0xf8b02000 (irq = 26, base_baud = 0) is a PL011 rev2
<6>f8b03000.uart: ttyAMA2 at MMIO 0xf8b03000 (irq = 27, base_baud = 0) is a PL011 rev2
<6>pl061_gpio f8b20000.gpio0: PL061 GPIO chip @0xf8b20000 registered
<6>pl061_gpio f8b21000.gpio1: PL061 GPIO chip @0xf8b21000 registered
<6>pl061_gpio f8b22000.gpio2: PL061 GPIO chip @0xf8b22000 registered
<6>pl061_gpio f8b23000.gpio3: PL061 GPIO chip @0xf8b23000 registered
<6>pl061_gpio f8b24000.gpio4: PL061 GPIO chip @0xf8b24000 registered
<6>pl061_gpio f8004000.gpio5: PL061 GPIO chip @0xf8004000 registered
<6>pl061_gpio f8b26000.gpio6: PL061 GPIO chip @0xf8b26000 registered
<6>pl061_gpio f8b27000.gpio7: PL061 GPIO chip @0xf8b27000 registered
<6>pl061_gpio f8b28000.gpio8: PL061 GPIO chip @0xf8b28000 registered
<6>pl061_gpio f8b29000.gpio9: PL061 GPIO chip @0xf8b29000 registered
<4>hisilicon-pcie: probe of f0001000.pcie failed with error -1
<6>hisi_iommu_ptable_addr:phy 0x1e800000    size:0x400000
<6>hisi_iommu_err_rdaddr :phy 0x1f757600    size:0x200
<6>hisi_iommu_err_wraddr :phy 0x1f757800     size:0x200
<6>in hisi_iommu_domain_init start 
<6>in hisi_iommu_domain_init end 
<6>vgaarb: loaded
<5>SCSI subsystem initialized
<7>libata version 3.00 loaded.
<6>ssp-pl022 f8b1a000.spi: ARM PL022 driver, device ID: 0x00041022
<6>ssp-pl022 f8b1a000.spi: mapped registers from 0xf8b1a000 to f9b1a000
<6>spi_master spi0: will run message pump with realtime priority
<6>usbcore: registered new interface driver usbfs
<6>usbcore: registered new interface driver hub
<6>usbcore: registered new device driver usb
<6>Linux video capture interface: v2.00
<6>Advanced Linux Sound Architecture Driver Initialized.
<6>clocksource: Switched to clocksource hisp804
<5>FS-Cache: Loaded
<6>NET: Registered protocol family 2
<6>TCP established hash table entries: 4096 (order: 2, 16384 bytes)
<6>TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
<6>TCP: Hash tables configured (established 4096 bind 4096)
<6>UDP hash table entries: 256 (order: 1, 8192 bytes)
<6>UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
<6>NET: Registered protocol family 1
<6>RPC: Registered named UNIX socket transport module.
<6>RPC: Registered udp transport module.
<6>RPC: Registered tcp transport module.
<6>RPC: Registered tcp NFSv4.1 backchannel transport module.
<7>PCI: CLS 0 bytes, default 64
<6>NetWinder Floating Point Emulator V0.97 (double precision)
<6>hw perfevents: enabled with armv7_cortex_a17 PMU driver, 7 counters available
<6>futex hash table entries: 1024 (order: 4, 65536 bytes)
<5>VFS: Disk quotas dquot_6.6.0
<6>VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
<6>squashfs: version 4.0 (2009/01/31) Phillip Lougher
<5>NFS: Registering the id_resolver key type
<5>Key type id_resolver registered
<5>Key type id_legacy registered
<6>nfs4filelayout_init: NFSv4 File Layout Driver Registering...
<6>Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
<5>FS-Cache: Netfs 'cifs' registered for caching
<6>jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
<6>fuse init (API version 7.23)
<7>yaffs: yaffs built Installing.
<6>bounce: pool size: 64 pages
<6>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
<6>io scheduler noop registered
<6>io scheduler deadline registered (default)
<6>io scheduler cfq registered
<6>hiahci-phy: registered new sata phy driver
<6>brd: module loaded
<6>loop: module loaded
<6>ahci f9900000.hiahci: SSS flag set, parallel bus scan disabled
<6>ahci f9900000.hiahci: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode
<6>ahci f9900000.hiahci: flags: ncq sntf stag pm led clo only pmp fbs slum part ccc sxs boh 
<6>scsi host0: ahci
<6>ata1: SATA max UDMA/133 mmio [mem 0xf9900000-0xf9900fff] port 0x100 irq 41
<6>hifmc100: registerd new interface driver hifmc100.
<5>hifmc100: Found flash memory controller hifmc100.
<6>FEPHY:addr=2, la_am=0xd, ldo_am=0x3, r_tuning=0x11
<6>libphy: himii: probed
<6>hi_eth: attached port 0 PHY 2 to driver HiSilicon Festa v330
<6>/soc/ethernet@f9840000/ethernet_phy@0 has invalid PHY address=255
<6>PPP generic driver version 2.4.2
<6>PPP BSD Compression module registered
<6>PPP Deflate Compression module registered
<6>usbcore: registered new interface driver asix
<6>usbcore: registered new interface driver ax88179_178a
<6>usbcore: registered new interface driver cdc_ether
<6>usbcore: registered new interface driver dm9601
<6>usbcore: registered new interface driver net1080
<6>usbcore: registered new interface driver cdc_subset
<6>usbcore: registered new interface driver zaurus
<6>usbcore: registered new interface driver cdc_ncm
<6>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<6>ehci-pci: EHCI PCI platform driver
<6>ehci-platform: EHCI generic platform driver
<6>ehci-platform f9890000.ehci: EHCI Host Controller
<6>ehci-platform f9890000.ehci: new USB bus registered, assigned bus number 1
<6>ehci-platform f9890000.ehci: irq 34, io mem 0xf9890000
<6>ehci-platform f9890000.ehci: USB 2.0 started, EHCI 1.00
<6>hub 1-0:1.0: USB hub found
<6>hub 1-0:1.0: 2 ports detected
<6>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
<6>ohci-pci: OHCI PCI platform driver
<6>ohci-platform: OHCI generic platform driver
<6>ohci-platform f9880000.ohci: Generic Platform OHCI controller
<6>ohci-platform f9880000.ohci: new USB bus registered, assigned bus number 2
<6>ohci-platform f9880000.ohci: irq 35, io mem 0xf9880000
<6>hub 2-0:1.0: USB hub found
<6>hub 2-0:1.0: 2 ports detected
<6>xhci-hcd f98a0000.xhci: xHCI Host Controller
<6>xhci-hcd f98a0000.xhci: new USB bus registered, assigned bus number 3
<6>xhci-hcd f98a0000.xhci: hcc params 0x0220f06c hci version 0x100 quirks 0x00030010
<6>xhci-hcd f98a0000.xhci: irq 37, io mem 0xf98a0000
<6>hub 3-0:1.0: USB hub found
<6>hub 3-0:1.0: 1 port detected
<6>xhci-hcd f98a0000.xhci: xHCI Host Controller
<6>xhci-hcd f98a0000.xhci: new USB bus registered, assigned bus number 4
<6>usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
<6>hub 4-0:1.0: USB hub found
<6>hub 4-0:1.0: 1 port detected
<6>usbcore: registered new interface driver usb-storage
<6>usbcore: registered new interface driver usbserial
<6>usbcore: registered new interface driver usbserial_generic
<6>usbserial: USB Serial support registered for generic
<6>usbcore: registered new interface driver usb_debug
<6>usbserial: USB Serial support registered for debug
<6>usbcore: registered new interface driver option
<6>usbserial: USB Serial support registered for GSM modem (1-port)
<6>usbcore: registered new interface driver pl2303
<6>usbserial: USB Serial support registered for pl2303
<6>mousedev: PS/2 mouse device common for all mice
<6>usbcore: registered new interface driver xpad
<6>i2c /dev entries driver
<6>IR NEC protocol handler initialized
<6>IR RC5(x/sz) protocol handler initialized
<6>IR RC6 protocol handler initialized
<6>IR JVC protocol handler initialized
<6>IR Sony protocol handler initialized
<6>IR SANYO protocol handler initialized
<6>IR Sharp protocol handler initialized
<6>IR MCE Keyboard/mouse protocol handler initialized
<6>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
<6>IR XMP protocol handler initialized
<6>ata1.00: ATA-8: SAMSUNG HM500JI, 2AC101C4, max UDMA/133
<6>ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
<6>ata1.00: configured for UDMA/133
<5>scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG HM500JI  01C4 PQ: 0 ANSI: 5
<5>sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
<5>sd 0:0:0:0: [sda] Write Protect is off
<7>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
<5>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<6>sp805-wdt f8a2c000.watchdog: registration successful
<4>registered new interface driver himciV2.0_4.4.35_20170401
<6>usb 1-2: new high-speed USB device number 2 using ehci-platform
<6>hub 1-2:1.0: USB hub found
<6>hub 1-2:1.0: 4 ports detected
<6>mmc0: MAN_BKOPS_EN bit is not set
<4>scan edges:3 p2f:5 f2p:8
<4>mix set temp-phase 2
<4>scan elemnts: startp:128 endp:107
<5>Tuning SampleClock. mix set phase:[03/07] ele:[05/16] 
<6>mmc0: new HS400 MMC card at address 0001
<6>mmcblk0: mmc0:0001 8GTF4R 7.28 GiB 
<6>mmcblk0boot0: mmc0:0001 8GTF4R partition 1 4.00 MiB
<6>mmcblk0boot1: mmc0:0001 8GTF4R partition 2 4.00 MiB
<6>mmcblk0rpmb: mmc0:0001 8GTF4R partition 3 512 KiB
<6> mmcblk0: p1(fastboot) p2(bootargs) p3(recovery) p4(bootoptions) p5(deviceinfo) p6(baseparam) p7(pqparam) p8(logo) p9(fastplay) p10(kernel) p11(trustedcore) p12(misc) p13(system) p14(vendor) p15(dvb) p16(cache) p17(private) p18(securestore) p19(linuxkernel1) p20(linuxkernel2) p21(linuxkernel3) p22(linuxkernel4) p23(userdata)
<6>usb 1-2.2: new full-speed USB device number 3 using ehci-platform
<6>usb 1-2.3: new high-speed USB device number 4 using ehci-platform
<5>f9c40000.himciv200.SD: eMMC/MMC/SD Device NOT detected!
<6>usbcore: registered new interface driver usbhid
<6>usbhid: USB HID core driver
<6>ashmem: initialized
<6>usbcore: registered new interface driver snd-usb-audio
<6>oprofile: using timer interrupt.
<6>Netfilter messages via NETLINK v0.30.
<6>nfnl_acct: registering with nfnetlink.
<6>ip_tables: (C) 2000-2006 Netfilter Core Team
<6>arp_tables: (C) 2002 David S. Miller
<6>NET: Registered protocol family 10
<6>NET: Registered protocol family 17
<5>Key type dns_resolver registered
<5>Registering SWP/SWPB emulation handler
<6>ALSA device list:
<6>  No soundcards found.
<3>Warning: unable to open an initial console.
<4>scan edges:3 p2f:1 f2p:4
<4>mix set temp-phase 6
<4>scan elemnts: startp:30 endp:24
<5>Tuning SampleClock. mix set phase:[06/07] ele:[05/11] 
<6>mmc1: new ultra high speed SDR104 SDXC card at address 0001
<6>mmcblk1: mmc1:0001 EE8QT 239 GiB 
<6> mmcblk1: p1
<6> sda: sda1
<5>sd 0:0:0:0: [sda] Attached SCSI removable disk
<6>Freeing unused kernel memory: 552K (c0a1e000 - c0aa8000)
<4>This architecture does not have kernel memory protection.
<6>EXT4-fs (mmcblk0p23): 1 orphan inode deleted
<6>EXT4-fs (mmcblk0p23): recovery complete
<6>EXT4-fs (mmcblk0p23): mounted filesystem with ordered data mode. Opts: (null)
<5>random: nonblocking pool is initialized
<6>EXT4-fs (sda1): recovery complete
<6>EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
<6>EXT4-fs (mmcblk1p1): recovery complete
<6>EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Opts: (null)
<6>usbcore: registered new interface driver tpm
<6>HI_DRV_SPI_Init success
<6>hisi-sndcard hisi-sndcard: aiao-hifi <-> hisi-i2s mapping ok
<4>spi spi0.0: invalid chip select
<4>hi_spi spi0.0: invalid chip select
<4>hi_spi spi0.0: invalid chip select
<6>input: dreambox advanced remote control (native) as /devices/virtual/input/input0
<6>DVB: registering new adapter (dvb0)
<6>platform dvb0.0: DVB: registering adapter 0 frontend 0 (DVB-T/T2/C)...
<6>platform dvb0.0: DVB: registering adapter 0 frontend 1 (DVB-S2)...
<6>input: front panel as /devices/virtual/input/input1
<4>Mali: Mali device driver loaded
<6>EXT4-fs (mmcblk0p23): re-mounted. Opts: data=ordered
<4>RTL871X: module init start
<4>RTL871X: rtl8192eu v4.4.1_17696.20160509_BTCOEX20160412-0042
<4>RTL871X: build time: Feb 24 2020 00:39:11
<4>RTL871X: rtl8192eu BT-Coex version = BTCOEX20160412-0042
<4>RTL871X: hal_com_config_channel_plan chplan:0x20
<4>RTL871X: Wrong rate section: (CCK,2T)
<4>RTL871X: Wrong rate section: (CCK,2T)
<4>RTL871X: Wrong rate section: (CCK,2T)
<4>RTL871X: Wrong rate section: (CCK,2T)
<4>RTL871X: Wrong rate section: (CCK,2T)
<4>RTL871X: Wrong rate section: (CCK,2T)
<4>RTL871X: Wrong rate section: (CCK,2T)
<4>RTL871X: Wrong rate section: (CCK,2T)
<4>RTL871X: Wrong rate section: (CCK,2T)
<4>RTL871X: Wrong rate section: (CCK,2T)
<4>RTL871X: Wrong rate section: (CCK,2T)
<4>RTL871X: Wrong rate section: (CCK,2T)
<4>RTL871X: Wrong rate section: (CCK,2T)
<4>RTL871X: Wrong rate section: (CCK,2T)
<4>RTL871X: Wrong rate section: (CCK,2T)
<4>RTL871X: Wrong rate section: (CCK,2T)
<4>RTL871X: Wrong rate section: (CCK,2T)
<4>RTL871X: Wrong rate section: (CCK,2T)
<4>RTL871X: Wrong rate section: (CCK,2T)
<4>RTL871X: Wrong rate section: (CCK,2T)
<4>RTL871X: Wrong rate section: (CCK,2T)
<4>RTL871X: Wrong rate section: (CCK,2T)
<4>RTL871X: Wrong rate section: (CCK,2T)
<4>RTL871X: Wrong rate section: (CCK,2T)
<4>RTL871X: Wrong rate section: (CCK,2T)
<4>RTL871X: Wrong rate section: (CCK,2T)
<4>RTL871X: Wrong rate section: (CCK,2T)
<4>RTL871X: Wrong rate section: (CCK,2T)
<4>RTL871X: Wrong rate section: (CCK,2T)
<4>RTL871X: Wrong rate section: (CCK,2T)
<4>RTL871X: Wrong rate section: (CCK,2T)
<4>RTL871X: Wrong rate section: (CCK,2T)
<4>RTL871X: Wrong rate section: (CCK,2T)
<4>RTL871X: Wrong rate section: (CCK,2T)
<4>RTL871X: Wrong rate section: (CCK,2T)
<4>RTL871X: Wrong rate section: (CCK,2T)
<4>RTL871X: Wrong rate section: (CCK,2T)
<4>RTL871X: Wrong rate section: (CCK,2T)
<4>RTL871X: Wrong rate section: (CCK,2T)
<4>RTL871X: Wrong rate section: (CCK,2T)
<4>RTL871X: Wrong rate section: (CCK,2T)
<4>RTL871X: Wrong rate section: (CCK,2T)
<4>RTL871X: Wrong rate section: (OFDM,2T)
<4>RTL871X: Wrong rate section: (OFDM,2T)
<4>RTL871X: Wrong rate section: (OFDM,2T)
<4>RTL871X: Wrong rate section: (OFDM,2T)
<4>RTL871X: Wrong rate section: (OFDM,2T)
<4>RTL871X: Wrong rate section: (OFDM,2T)
<4>RTL871X: Wrong rate section: (OFDM,2T)
<4>RTL871X: Wrong rate section: (OFDM,2T)
<4>RTL871X: Wrong rate section: (OFDM,2T)
<4>RTL871X: Wrong rate section: (OFDM,2T)
<4>RTL871X: Wrong rate section: (OFDM,2T)
<4>RTL871X: Wrong rate section: (OFDM,2T)
<4>RTL871X: Wrong rate section: (OFDM,2T)
<4>RTL871X: Wrong rate section: (OFDM,2T)
<4>RTL871X: Wrong rate section: (OFDM,2T)
<4>RTL871X: Wrong rate section: (OFDM,2T)
<4>RTL871X: Wrong rate section: (OFDM,2T)
<4>RTL871X: Wrong rate section: (OFDM,2T)
<4>RTL871X: Wrong rate section: (OFDM,2T)
<4>RTL871X: Wrong rate section: (OFDM,2T)
<4>RTL871X: Wrong rate section: (OFDM,2T)
<4>RTL871X: Wrong rate section: (OFDM,2T)
<4>RTL871X: Wrong rate section: (OFDM,2T)
<4>RTL871X: Wrong rate section: (OFDM,2T)
<4>RTL871X: Wrong rate section: (OFDM,2T)
<4>RTL871X: Wrong rate section: (OFDM,2T)
<4>RTL871X: Wrong rate section: (OFDM,2T)
<4>RTL871X: Wrong rate section: (OFDM,2T)
<4>RTL871X: Wrong rate section: (OFDM,2T)
<4>RTL871X: Wrong rate section: (OFDM,2T)
<4>RTL871X: Wrong rate section: (OFDM,2T)
<4>RTL871X: Wrong rate section: (OFDM,2T)
<4>RTL871X: Wrong rate section: (OFDM,2T)
<4>RTL871X: Wrong rate section: (OFDM,2T)
<4>RTL871X: Wrong rate section: (OFDM,2T)
<4>RTL871X: Wrong rate section: (OFDM,2T)
<4>RTL871X: Wrong rate section: (OFDM,2T)
<4>RTL871X: Wrong rate section: (OFDM,2T)
<4>RTL871X: Wrong rate section: (OFDM,2T)
<4>RTL871X: Wrong rate section: (OFDM,2T)
<4>RTL871X: Wrong rate section: (OFDM,2T)
<4>RTL871X: Wrong rate section: (OFDM,2T)
<4>RTL871X: duplicate tx power limit combination [band 2.4G][regulation FCC][bw 20M][rate section HT][rf path 2T][chnl 01]
<4>RTL871X: duplicate tx power limit combination [band 2.4G][regulation ETSI][bw 20M][rate section HT][rf path 2T][chnl 01]
<4>RTL871X: duplicate tx power limit combination [band 2.4G][regulation MKK][bw 20M][rate section HT][rf path 2T][chnl 01]
<4>RTL871X: duplicate tx power limit combination [band 2.4G][regulation FCC][bw 20M][rate section HT][rf path 2T][chnl 02]
<4>RTL871X: duplicate tx power limit combination [band 2.4G][regulation ETSI][bw 20M][rate section HT][rf path 2T][chnl 02]
<4>RTL871X: duplicate tx power limit combination [band 2.4G][regulation MKK][bw 20M][rate section HT][rf path 2T][chnl 02]
<4>RTL871X: duplicate tx power limit combination [band 2.4G][regulation FCC][bw 20M][rate section HT][rf path 2T][chnl 03]
<4>RTL871X: duplicate tx power limit combination [band 2.4G][regulation ETSI][bw 20M][rate section HT][rf path 2T][chnl 03]
<4>RTL871X: duplicate tx power limit combination [band 2.4G][regulation MKK][bw 20M][rate section HT][rf path 2T][chnl 03]
<4>RTL871X: duplicate tx power limit combination [band 2.4G][regulation FCC][bw 20M][rate section HT][rf path 2T][chnl 04]
<4>RTL871X: duplicate tx power limit combination [band 2.4G][regulation ETSI][bw 20M][rate section HT][rf path 2T][chnl 04]
<4>RTL871X: duplicate tx power limit combination [band 2.4G][regulation MKK][bw 20M][rate section HT][rf path 2T][chnl 04]
<4>RTL871X: duplicate tx power limit combination [band 2.4G][regulation FCC][bw 20M][rate section HT][rf path 2T][chnl 05]
<4>RTL871X: duplicate tx power limit combination [band 2.4G][regulation ETSI][bw 20M][rate section HT][rf path 2T][chnl 05]
<4>RTL871X: duplicate tx power limit combination [band 2.4G][regulation MKK][bw 20M][rate section HT][rf path 2T][chnl 05]
<4>RTL871X: duplicate tx power limit combination [band 2.4G][regulation FCC][bw 20M][rate section HT][rf path 2T][chnl 06]
<4>RTL871X: duplicate tx power limit combination [band 2.4G][regulation ETSI][bw 20M][rate section HT][rf path 2T][chnl 06]
<4>RTL871X: duplicate tx power limit combination [band 2.4G][regulation MKK][bw 20M][rate section HT][rf path 2T][chnl 06]
<4>RTL871X: duplicate tx power limit combination [band 2.4G][regulation FCC][bw 20M][rate section HT][rf path 2T][chnl 07]
<4>RTL871X: duplicate tx power limit combination [band 2.4G][regulation ETSI][bw 20M][rate section HT][rf path 2T][chnl 07]
<4>RTL871X: duplicate tx power limit combination [band 2.4G][regulation MKK][bw 20M][rate section HT][rf path 2T][chnl 07]
<4>RTL871X: duplicate tx power limit combination [band 2.4G][regulation FCC][bw 20M][rate section HT][rf path 2T][chnl 08]
<4>RTL871X: duplicate tx power limit combination [band 2.4G][regulation ETSI][bw 20M][rate section HT][rf path 2T][chnl 08]
<4>RTL871X: duplicate tx power limit combination [band 2.4G][regulation MKK][bw 20M][rate section HT][rf path 2T][chnl 08]
<4>RTL871X: duplicate tx power limit combination [band 2.4G][regulation FCC][bw 20M][rate section HT][rf path 2T][chnl 09]
<4>RTL871X: duplicate tx power limit combination [band 2.4G][regulation ETSI][bw 20M][rate section HT][rf path 2T][chnl 09]
<4>RTL871X: duplicate tx power limit combination [band 2.4G][regulation MKK][bw 20M][rate section HT][rf path 2T][chnl 09]
<4>RTL871X: duplicate tx power limit combination [band 2.4G][regulation FCC][bw 20M][rate section HT][rf path 2T][chnl 10]
<4>RTL871X: duplicate tx power limit combination [band 2.4G][regulation ETSI][bw 20M][rate section HT][rf path 2T][chnl 10]
<4>RTL871X: duplicate tx power limit combination [band 2.4G][regulation MKK][bw 20M][rate section HT][rf path 2T][chnl 10]
<4>RTL871X: duplicate tx power limit combination [band 2.4G][regulation FCC][bw 20M][rate section HT][rf path 2T][chnl 11]
<4>RTL871X: duplicate tx power limit combination [band 2.4G][regulation ETSI][bw 20M][rate section HT][rf path 2T][chnl 11]
<4>RTL871X: duplicate tx power limit combination [band 2.4G][regulation MKK][bw 20M][rate section HT][rf path 2T][chnl 11]
<4>RTL871X: duplicate tx power limit combination [band 2.4G][regulation ETSI][bw 20M][rate section HT][rf path 2T][chnl 12]
<4>RTL871X: duplicate tx power limit combination [band 2.4G][regulation MKK][bw 20M][rate section HT][rf path 2T][chnl 12]
<4>RTL871X: duplicate tx power limit combination [band 2.4G][regulation ETSI][bw 20M][rate section HT][rf path 2T][chnl 13]
<4>RTL871X: duplicate tx power limit combination [band 2.4G][regulation MKK][bw 20M][rate section HT][rf path 2T][chnl 13]
<4>RTL871X: duplicate tx power limit combination [band 2.4G][regulation FCC][bw 40M][rate section HT][rf path 2T][chnl 03]
<4>RTL871X: duplicate tx power limit combination [band 2.4G][regulation ETSI][bw 40M][rate section HT][rf path 2T][chnl 03]
<4>RTL871X: duplicate tx power limit combination [band 2.4G][regulation MKK][bw 40M][rate section HT][rf path 2T][chnl 03]
<4>RTL871X: duplicate tx power limit combination [band 2.4G][regulation FCC][bw 40M][rate section HT][rf path 2T][chnl 04]
<4>RTL871X: duplicate tx power limit combination [band 2.4G][regulation ETSI][bw 40M][rate section HT][rf path 2T][chnl 04]
<4>RTL871X: duplicate tx power limit combination [band 2.4G][regulation MKK][bw 40M][rate section HT][rf path 2T][chnl 04]
<4>RTL871X: duplicate tx power limit combination [band 2.4G][regulation FCC][bw 40M][rate section HT][rf path 2T][chnl 05]
<4>RTL871X: duplicate tx power limit combination [band 2.4G][regulation ETSI][bw 40M][rate section HT][rf path 2T][chnl 05]
<4>RTL871X: duplicate tx power limit combination [band 2.4G][regulation MKK][bw 40M][rate section HT][rf path 2T][chnl 05]
<4>RTL871X: duplicate tx power limit combination [band 2.4G][regulation FCC][bw 40M][rate section HT][rf path 2T][chnl 06]
<4>RTL871X: duplicate tx power limit combination [band 2.4G][regulation ETSI][bw 40M][rate section HT][rf path 2T][chnl 06]
<4>RTL871X: duplicate tx power limit combination [band 2.4G][regulation MKK][bw 40M][rate section HT][rf path 2T][chnl 06]
<4>RTL871X: duplicate tx power limit combination [band 2.4G][regulation FCC][bw 40M][rate section HT][rf path 2T][chnl 07]
<4>RTL871X: duplicate tx power limit combination [band 2.4G][regulation ETSI][bw 40M][rate section HT][rf path 2T][chnl 07]
<4>RTL871X: duplicate tx power limit combination [band 2.4G][regulation MKK][bw 40M][rate section HT][rf path 2T][chnl 07]
<4>RTL871X: duplicate tx power limit combination [band 2.4G][regulation FCC][bw 40M][rate section HT][rf path 2T][chnl 08]
<4>RTL871X: duplicate tx power limit combination [band 2.4G][regulation ETSI][bw 40M][rate section HT][rf path 2T][chnl 08]
<4>RTL871X: duplicate tx power limit combination [band 2.4G][regulation MKK][bw 40M][rate section HT][rf path 2T][chnl 08]
<4>RTL871X: duplicate tx power limit combination [band 2.4G][regulation FCC][bw 40M][rate section HT][rf path 2T][chnl 09]
<4>RTL871X: duplicate tx power limit combination [band 2.4G][regulation ETSI][bw 40M][rate section HT][rf path 2T][chnl 09]
<4>RTL871X: duplicate tx power limit combination [band 2.4G][regulation MKK][bw 40M][rate section HT][rf path 2T][chnl 09]
<4>RTL871X: duplicate tx power limit combination [band 2.4G][regulation FCC][bw 40M][rate section HT][rf path 2T][chnl 10]
<4>RTL871X: duplicate tx power limit combination [band 2.4G][regulation ETSI][bw 40M][rate section HT][rf path 2T][chnl 10]
<4>RTL871X: duplicate tx power limit combination [band 2.4G][regulation MKK][bw 40M][rate section HT][rf path 2T][chnl 10]
<4>RTL871X: duplicate tx power limit combination [band 2.4G][regulation FCC][bw 40M][rate section HT][rf path 2T][chnl 11]
<4>RTL871X: duplicate tx power limit combination [band 2.4G][regulation ETSI][bw 40M][rate section HT][rf path 2T][chnl 11]
<4>RTL871X: duplicate tx power limit combination [band 2.4G][regulation MKK][bw 40M][rate section HT][rf path 2T][chnl 11]
<4>RTL871X: rtw_ndev_init(wlan0) if1 mac_addr=74:ee:2a:3e:d1:41
<6>usbcore: registered new interface driver rtl8192eu
<4>RTL871X: module init ret=0
<6>IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>hieth f9c30000.hieth eth0: Link is Up - 100Mbps/Full - flow control rx/tx
<6>IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

[Nemoxyz]

@Medardo la prossima volta un crashlog sotto "code" mettilo altrimenti viene un papello impossibile...
Openpli 7.2 non è compatibile con quella skin !! utilizza la NOWAeO oppure PLi6.2 se ti interessa quella skin !!! openATV 6.4 non dovrebbe avere problemi per cui su quella nulla osta. Saluti.

[angeloc9]

Buongiorno a tutti

Ha scritto dopo 6 minuti 53 secondi:
Vorrei un informazione ho acquistato questo Decoder Zgemma H9 Combo Multistream S2X-T2/C Wi-Fi 4K UHD 8GB flash e vorrei sapere se prima di sostituire l immagine dovrei fare la procedura della Flash Recovery premetto che il decoder lho appena acquistato e ha ancora l immagine originale.

Ha scritto dopo 1 minuto 35 secondi:
La procedura per sostituire l immagine e quella che e postata all inizio di questa discussione?